Bedienungsanleitung Philips Fidelio B97 - Soundbar 7.1.2 (Seite 14 von 25) (Englisch)

743801

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

13 EN

7 After connection, you can change the

device name. There are several names

to choose from or create your own by

choosing Custom Name at the bottom

of the name list. Otherwise, if follows the

default name.

8 After connection, this product may

perform a software update.

»Upgrade to the latest software when it

is set up for the rst time. The software

upgrade may take several minutes. Do

not unplug your speaker, turn o your

device, or break the network during the

update.

AirPlay setup

Use AirPlay to set up the Wi-Fi connection

between iOS device (iOS7 or later) and

soundbar.

1 iOS device: Settings > Wi-Fi > select

home network [Play-Fi device (xxxxxx)].

2 Launch the Philips Sound app powered

by DTS Play-Fi. Follow the instructions

in the app to connect this product to

your Wi-Fi network.

»After successful Wi-Fi connection,

the Wi-Fi LED indicator on the front

cabinet will stop pulsing and turn solid.

Once you set up this product on your

Wi-Fi network, you can control it from

any smartphone or tablet on the same

network.

»When using the app to play music, the

display panel will show PLAY-FI.

3 After connection, you can change the

device name. There are several names

to choose from or create your own by

choosing Custom Name at the bottom

of the name list. Otherwise, if follows the

default name.

4 After connection, this product may

perform a software update.

»Upgrade to the latest software when it

is set up for the rst time. The software

upgrade may take several minutes. Do

not unplug your speaker, turn o your

device, or break the network during the

update.

Note

• After connection, the product may perform

a software update. Upgrade is required after

initial setup. Without the upgrade, not all

product features can be available.

•When the rst-time setup is not successful,

press and hold the Wi-Fi button on the

soundbar for 8 seconds until the second

tone can be heard and the Wi-Fi LED is

changed to slow pulse. Reset the Wi-Fi

connection, restart the app and start the

setup again.

•If you want to change from one network to

another, you need to set up the connection

again. Press and hold the Wi-Fi button the

soundbar for 8 seconds to reset the Wi-Fi

connection..

WPS mode

If your router has Wi-Fi Protected Setup

(WPS), you can set up the connection

without entering a password.

1 Press and hold the Wi-Fi button for 4

seconds. You will hear a tone and the

Wi-Fi LED will begin in double blink.

2 Press the WPS

button on your

router. The button

is normally marked

with this WPS logo.

3 Follow the instruction in Philips Sound

app powered by DTS Play-Fi to start the

pairing.

Note

•WPS is not a standard feature on all routers.

If your router does not have WPS then use

the starndard Wi-Fi setup.

•Press the Wi-Fi button once if you want to

exit the WPS mode or it will automatically

exit after 2 mintues..

WPS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips Fidelio B97 - Soundbar 7.1.2 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips Fidelio B97 - Soundbar 7.1.2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info