4
Do not insert the power plug in a wall socket before
all connections are made.
& Place the receiver box wherever you want, but make sure
that air can circulate freely through the ventilation slots. Do
not install the receiver box in a confined space such as a
book case or a similar unit.
To prevent any unsafe situations, no naked flame sources,
such as lighted candles, should be placed on or in the
vicinity.Avoid heat, direct sunlight and exposure to rain or
water.
The equipment must not be exposed to dripping or
splashing and no objects filled with liquids, such as vases,
should be placed on it.
é Connect the antenna cable 1 and the VGA cable with
trailing audio cinch connectors 2 as shown in the inside
frontcover of this handbook.
Make sure all screws of the cable 2 are tightened well.
TV receiver box with speakerless monitor
In case you connect your TV receiver box with a speakerless
monitor, all references made in this instruction book to sound
reproduction, volume control, and audio connections, are not
applicable (except for a headphone connection).
The buttons on the remote control referring to sound have no
function either.
“ To connect your computer, see the separate supplied
instruction manual with your monitor.
To connect other accessory devices, see p. 16.
In order to obtain the best result, please use only the
supplied antenna cables between the receiver box and
videorecorder, and between videorecorder and antenna
connector.
‘ Insert the power cord supplied 3 into the MAINS at the
back of the monitor and the power cord 4 at the back of
the receiver. Put both in the wall sockets with an AC power
supply of 110 V. Consult your local dealer if your AC power
supply is different.
Please, only use the power cord 3 supplied with the
monitor, for the monitor, and use the power cord supplied
with the receiver, only for the receiver.
( Remote control: Remove the cover of the battery
compartment.
Insert the 2 batteries supplied (Type R6AA-1.5V).
The batteries supplied do not contain the heavy metals mercury
and cadmium. Nevertheless in many areas exhausted batteries
may not be disposed of with your household waste. Please check
on how to dispose of batteries according to local regulations.
§ Turn the receiver on : Press the power button A at the
right side of the monitor and the one on the front of the
receiver box.
A green indicator and the screen light up.
Note: After turning on your TV receiver box with the power switch,
wait about 5 seconds to turn on your PDP Flat TV monitor.
The green indicator blinks every time you press a button on the
remote control.
When you turn on your set for the first time, the menu
LANGUAGE automatically appears on the screen. Alternately
the explanation appears in different languages.
Preparation
min.
