Bedienungsanleitung Philips FWM779 (Seite 22 von 29) (Englisch)

43604

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

English

IMPORTANT!

Make sure the FM and MW antennas are

connected.

Tuning to radio stations

1 Press TUNER to enter tuner mode.

To select another waveband (FM or MW), press

TUNER again.

2 Press and hold à or á until the frequency

indication starts to change, then release.

➜ The system automatically tunes to the next

strong signal radio reception.

➜ lights up for FM stereo reception.

➜ RDS lights up for RDS station (in FM band

only).

Tuning to a weak signal station,

● Press à or á briefly and repeatedly until an

optimal reception is found.

Presetting radio stations

You can store up to 40 preset radio stations in

the memory, starting from FM and followed by

MW bands.

Notes:

– The system will exit presetting mode if no

button is pressed within 20 seconds.

– If no stereo frequency is detected during Plug

and Play, “CHECK ANTENNA” is displayed.

Using the plug and play (page 3 - P3)

Plug and Play allows you to store all available

radio stations automatically.

1 Connect the system to the power supply,

“AUTO INSTALL - PRESS PLAY” is

displayed.

In the Eco Power standby/standby mode,

press and hold ÉÅ on the main unit until

“AUTO INSTALL - PRESS PLAY” is

displayed.

2 Press ÉÅ on the main unit to start installation.

➜ “INSTALL TUNER” is displayed.

➜ All previously stored radio stations will be

replaced.

Tuner Operations

➜ Once completed, the last tuned radio station

will be played.

➜ Once completed, the last tuned radio station

(or the first available RDS station) will be played.

3 If the first preset is a RDS station, it will

proceed to set the RDS clock.

➜ "INSTALL" is displayed, followed by "TIME"

and "SEARCH RDS TIME".

➜ When RDS time is read, "RDS TIME" is

displayed and the current time will be stored.

➜ If RDS station does not transmit RDS time

within 90 seconds, “NO RDS TIME” is displayed

and the programme will exit automatically.

Automatic presetting

You can start the automatic presetting from a

selected preset number.

1 In the tuner mode, press í or ë to select a

preset number.

2 Press and hold PROGRAM (PROG) until

“AUTO” is displayed.

➜ If a radio station has been stored in one of

the presets, it will not be stored again at another

preset number.

➜ If no preset number is selected, automatic

preset will begin from preset (1) and all your

previous presets will be overridden.

Manual presetting

You can choose to store only the favourite radio

stations.

1 Tune to your desired radio station (refer to

“Tuning to radio stations”).

2 Press PROGRAM (PROG).

➜ The preset number starts flashing. If you want

to store the radio station in another preset

number, press í or ë.

3 Press PROGRAM (PROG) again to store.

● Repeat steps 1–3 to store other radio stations.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips FWM779 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips FWM779

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info