Bedienungsanleitung Philips gc 4730 i (Seite 8 von 48) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

323920

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

If you do not know what kind or kinds of fabric an article is made of, determine the right ironing

temperature by ironing a part that is not visible when you wear or use the article.

Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches. To

prevent stains, do not use the spray function.

Start ironing the articles that require the lowest ironing temperature, such as those made of

synthetic bres.

4 Set the appropriate steam setting (see ‘Temperature and steam settings’ table) (Fig. 8).

Note: Make sure that the steam setting you select is suitable for the set ironing temperature.

5 Put the mains plug in an earthed wall socket.

, The amber temperature light goes on (Fig. 9).

6 When the amber temperature light has gone out, wait a while before you start ironing.

The temperature light goes on from time to time during ironing.





1 Set the steam control to position 0 (= no steam).

2 Set the required ironing temperature (see chapter ‘Preparing for use’, section ‘Selecting

temperature and steam setting’).



Note: The iron may give off some smoke when you use it for the rst time. This ceases after a short while.

1 Make sure that there is enough water in the water tank.

2 Set the required ironing temperature (see chapter ‘Preparing for use’, section ‘Selecting

temperature and steam setting’) (Fig. 7).

3 Set the appropriate steam setting (see chapter ‘Preparing for use’, section ‘Selecting

temperature and steam setting’) (Fig. 8).

Note: The iron starts to produce steam as soon as it reaches the set temperature.



When you use the Ionic DeepSteam function during steam ironing, the steam produced is ner than

during regular steam ironing. Fine steam reaches deeper, especially into thick fabrics. This helps you

to remove stubborn creases easily.

1 Make sure that there is enough water in the water tank.

2 Set the required ironing temperature (see chapter ‘Preparing for use’, section ‘Selecting

temperature and steam setting’) (Fig. 7).

3 Set the appropriate steam setting (see chapter ‘Preparing for use’, section ‘Selecting

temperature and steam setting’). (Fig. 8)

4 Press and hold the Ionic DeepSteam trigger (Fig. 10).

, The blue Ionic DeepSteam light goes on and you hear a humming sound (Fig. 11).

5 The iron now produces Ionic DeepSteam to help you remove even the toughest

creases (Fig. 12).

Note: The Ionic DeepSteam function is only effective when it is used in combination with a steam setting

and a temperature setting between 2 and MAX.

8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips gc 4730 i Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info