Bedienungsanleitung Philips GC 7200 Series (Seite 9 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

451033

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

Note: When you switch on the appliance, the steam tank produces a pumping sound. This sound is

normal and indicates that water is pumped into the steam tank.

Tips

If you have ironed at a high temperature and then set the temperature dial to a lower setting,

wait until the temperature light goes on again before you continue ironing. This prevents damage

to your fabrics.

Start ironing the articles that require the lowest ironing temperature, such as those made of

synthetic bres.

Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches.

Iron velvet and other fabrics that tend to acquire shiny patches in one direction only (along with

the nap) while you apply very little pressure.

Do not use steam when you iron coloured silk. This could cause stains.

Using the appliance

Note: Some smoke and particles may come out of the iron when you use it for the rst time. This is

normal and stops after a short while.

Note: When you switch on the appliance, the steam tank produces a pumping sound. This sound is

normal and indicates that water is being pumped into the steam tank.

Steam ironing

Never direct the steam at people.

Steam ironing is only possible at higher ironing temperatures (temperature settings

2 to MAX).

1 Make sure that there is enough water in the water tank.

2 Select an ironing temperature between 2andMAX.(Fig.6)

3 Putthemainspluginanearthedwallsocketandsettheon/offswitchtoon(GC7320/

GC7220)orpresstheon/offbutton(GC7330/GC7240/GC7230)(Fig.7).

The power-on light on the steam tank and the iron temperature light go on to indicate that

the steam tank and the iron start to heat up.

GC7330/GC7240/GC7230:Thehighsteamsettinglightashestoindicatethatthesteam

tank is heating up.

After approx. 2 minutes, the steam light stays on continuously, to indicate that the water in

the steam tank is hot enough for steam ironing.

4 GC7330/GC7240/GC7230:Pressthesteamsettingselectortosetasteamsettingsuitable

fortheselectedironingtemperature:(Fig.8)

Select the low steam setting for temperature setting

Select the low or high steam setting for temperature settings

3 to MAX.

5 Keepthesteamactivatorpressedinwhileyousteamiron.(Fig.9)

When you put the iron down after ironing, put it on its heel or on the iron stand.

If you want to use the steam function continuously, slide the steam activator lock to the locking

position. To stop steaming, release the steam activator lock (Fig. 10).

Release the steam lock when you put the iron on its heel or on the iron stand. This makes the

water in the water tank last longer.

Note: If you have not used the steam function for some time, the steam that was still present in the

supply hose will have condensed into water. When you start to steam iron again, this can cause some

spluttering in the appliance and some water droplets to escape from the soleplate.

ENGLISH 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips GC 7200 Series Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info