Bedienungsanleitung Philips GC 7330 (Seite 12 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

113211

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

Environment

Do not throw away the appliance with the normal household waste at the end of its life, but

hand it in at an ofcial collection point for recycling. By doing this, you help to preserve the

environment (Fig. 26).

Guarantee & service

If you need information or if you have a problem, please visit the Philips website at www.philips.com

or contact the Philips Customer Care Centre in your country (you nd its phone number in the

worldwide guarantee leaet).

If there is no Customer Care Centre in your country, go to your local Philips dealer or contact the

Service Department of Philips Domestic Appliances and Personal Care BV.

Frequently asked questions

This chapter lists the questions most frequently asked about the appliance. If you cannot nd the

answer to your question, contact the Customer Care Centre in your country.

General:

Question Answer

Why does smoke

come out of the

appliance after I have

switched it on for the

rst time?

This is normal. Some parts of the iron have been greased lightly in the

factory. This phenomenon ceases after a short while.

Why do dirt particles

come out of the

soleplate of the new

iron?

This is normal with a new iron. These particles are harmless and stop

coming out of the soleplate when you have used the iron a few times.

Why do dirt particles

come out of the iron

during ironing?

Impurities or chemicals present in the water may have deposited in the

steam tank and/or on the soleplate. Clean the soleplate and rinse the

steam tank (see chapter ‘Cleaning and maintenance’).

Why do droplets of

water escape from the

soleplate?

The temperature dial may be set to a temperature that is too low for

steam ironing. Select an ironing temperature that is suitable for steam

ironing (temperature settings 2 to MAX).

You may have used the steam boost function when you started ironing.

First steam iron for a while before you use the steam boost function. It

is normal that some water droplets come out of the iron occasionally.

You may have placed the steam tank on an unstable and/or uneven

surface. Place the steam tank on a stable and even surface.

When you start to steam iron, the hose is cold. Steam condenses in the

hose, which causes droplets of water to escape from the soleplate. This

is normal. Hold the iron over an old cloth and press the steam activator.

The cloth absorbs the droplets. After a few seconds the steam

production normalises.

Why does the

soleplate become

dirty?

Impurities or chemicals present in water may have deposited on the

soleplate. Clean the soleplate with a damp cloth.

ENGLISH12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips GC 7330 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips GC 7330

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info