Bedienungsanleitung Philips GC 7430 (Seite 8 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

451023

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite



Never direct the steam at people.



2

1 Make sure that there is enough water in the water tank.

2 Place the steam tank on the ironing board and put the iron on it. (Fig. 4)

3 To set the required ironing temperature, turn the temperature dial to the appropriate

position. (Fig. 5)

Note: 

2

4 Put the mains plug in a wall socket and set the on/off switch to on (GC7420) or press the

on/off button (GC7430) (Fig. 6).

Note: When you switch on the appliance, the steam tank produces a pumping sound. This sound is

normal and indicates that water is being pumped into the steam tank.

, The power-on light on the steam tank and the iron temperature light go on to indicate that

the steam tank and the iron start to heat up.

, GC7430: The high steam setting light ashes to indicate that the steam tank is heating up.

, After approx. 2 minutes, the steam setting light stays on continuously, to indicate that the

water in the steam tank is hot enough for steam ironing.

5 GC7430: Press the steam setting selector to set a steam setting suitable for the selected

ironing temperature: (Fig. 7)

- Select the ECO setting for optimum ironing performance at temperature settings 2 to MAX.

- Select the high steam setting for temperature settings 3 to MAX.

Note: During ironing, the temperature light goes on from time to time. This indicates that the iron is

heating up to the set temperature.

6 Keep the steam activator pressed in while you steam iron. (Fig. 8)

- If you want to use the steam function continuously, slide the steam lock to the locking position.

To stop steaming, release the steam lock (Fig. 9).

- Release the steam lock when you put the iron on its heel. This makes the water in the water

tank last longer.



Do not press the steam activator while you iron.

1 Set the required ironing temperature (see chapter ‘Preparing for use’, section ‘Setting the

temperature’). (Fig. 5)

2 Put the mains plug in a wall socket and press the on/off button (Fig. 10).

, The soleplate starts to heat up.

3 Press the steam selector and select ‘no steam’. (Fig. 7)

, The ‘no-steam’ light goes on.

4 Iron without pressing the steam activator.

, If the steam tank is empty or has not heated up yet, you hear a clicking sound inside the tank.

This sound is caused by the opening of the steam valve and is perfectly harmless.

8

4239.000.7496.1.indd 8 23-10-09 10:01

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips GC 7430 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info