Bedienungsanleitung Philips GC 9080 (Seite 8 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

451037

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Note: Do not tilt or shake the steam generator when the water tank is full, otherwise water may spill out

of the lling hole.

3 Make sure that the water tank is rmly attached to the steam generator, otherwise the iron

does not produce any steam.

4 Place the iron resting mat on the ironing board. (Fig. 5)

5 Slide the carry lock slide to the left to unlock the iron from the steam generator. Place the

iron on the iron resting mat.

6 Put the mains plug in an earthed wall socket and switch on the steam generator.

7 To set the required ironing temperature, turn the temperature dial to the appropriate

position (Fig. 6).

Note: Steam ironing is only possible at higher ironing temperatures (temperature settings 2 or higher).

8 Turn the power knob to the desired steam setting to switch on the appliance. Make sure the

steam setting is suitable for the selected ironing temperature (Fig. 7).

1 Set to ECO steam (temperature settings 2 to MAX).

2 Set to moderate steam (temperature settings 3 to MAX).

3 Set to maximum steam (temperature setting to MAX).

, The corresponding steam setting light ashes to indicate that the steam generator is heating

up (Fig. 8).

, After approx. 2 minutes, the corresponding steam setting light stays on to indicate that the

steam generator is ready for steam ironing.

9 Press the steam trigger and keep it pressed while you steam iron. (Fig. 9)

To iron without steam, simply use the iron without pressing the steam trigger.

Note: You can safely put the hot iron on the iron resting mat during ironing. Do not place the mat with

hot iron on a surface that can be scorched by heat.

Note: Do not touch the iron resting mat for some time after you have removed the hot iron from it, as

the mat is hot.



During steam ironing, you can use the steam boost function to remove stubborn creases.

1 Set the temperature dial to a setting between 3 and MAX.

2 Press the steam boost button. (Fig. 10)

Never direct the steam at people.

Note: Some water droplets may appear when you use the steam boost function for the rst time. The

water droplets disappear after you have used the steam boost function for some time.





Never remove the Calc-Clean rinsing cap when the steam generator is hot.

Note: The Anti-Calc tablet helps to reduce scale build-up in the steam generator. Rinse the steam

generator once a month or after every 10 times of use for optimal steaming performance.

1 Unplug the appliance and let it cool down for 2 hours.

2 Remove the detachable water tank. Hold the steam generator with both hands and shake

well. (Fig. 11)

8

4239.000.7504.2.indd 8 18-06-10 09:12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips GC 9080 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info