◗ GC2016/2015/2010/2006/2005: water may leak from the soleplate
if the set ironing temperature is too low (MIN to 2).
Ironing without steam
1 Set the steam control to position O ( = no steam).
2 Select the recommended ironing temperature (See chapter
'Preparing for use').
Features
Spray function
You can use the spray function to remove stubborn creases at any
temperature.
Make sure that there is enough water in the water tank.
C
1 Press the spray button a number of times to moisten the
article to be ironed.
Extra steam (GC2020/2006/2005 only)
This function provides extra stream to remove very stubborn creases.
The extra-steam function can only be used at temperature settings
between 3 and MAX.
C
1 Set the steam control to the extra-steam position w.
C
2 Press and hold the steam control for max. 5 seconds.
3 Wait at least 1 minute before you use the extra-steam function
again to prevent water from dripping out of the soleplate.
Steam boost (GC2030/2025/2016/2015/2010 only)
A powerful steam boost helps to remove very stubborn creases.
The steam-boost function can only be used at temperature settings
between 2 and MAX.
ENGLISH 9
