Bedienungsanleitung Philips GC4932 (Seite 6 von 38) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Schwedisch, Norwegisch, Finnisch)

666374

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

ENGLISH

Problem Possible cause Solution

The iron is not hot enough yet

to product steam.

Wait until the ‘iron ready’ light has

stopped breathing and lights up steadily.

Water droplets drips

onto the garment

during ironing.

You have used the steam

boost function too often

within a short period.

Continue ironing in horizontal position

and wait a while before you use the

steam boost function again.

You have not closed the water

tank lid properly.

Press the lid until you hear a ‘click’.

You have not insert the

Quick Calc Release collector

properly back to the appliance

(specic types only).

Stop ironing and let the iron cools down

for at least 1 hour. Take out the Quick

Calc Release collector. Insert it back into

the appliance and ensure the collector is

in-line with the surface of the appliance.

Push down the lever (“click”).

If the Quick Calc Release collector is

damaged, contact a consumer care

center in your country (see the world wide

guarantee leaet for contact details).

The iron does not

produce a steam

boost.

You have used the steam

boost function too often

within a short period.

Continue ironing in horizontal position

and wait a while before you use the

steam boost function again.

The iron is not hot enough for

ironing yet.

Wait until the ‘iron ready’ light has

stopped breathing and lights up steadily.

You have put a chemical into

the water tank.

Rinse the water tank and do not put any

perfume or chemicals into the water tank.

Dirty water and

impurities come

out of the soleplate

during ironing.

Hard water with impurities or

chemicals has formed akes

inside the soleplate.

Perform Quick Calc Release (specic

types only) or Calc-Clean (specic types

only).

See chapter “Cleaning and maintenance”.

Water drips from

the soleplate after

the iron has been

unplugged.

You have put the iron in

horizontal position with water

still left in the water tank.

Empty the water tank after use, or store

the iron in vertical position.

The steam slider is set to . Set the steam slider to .

There is an amber

light ashing on the

handle of the iron.

The Calc-Clean reminder light

is activated. This is to remind

you to perform calc clean.

Perform Quick Calc Release (specic

types only) or Calc-Clean (specic

types only). See chapter “Cleaning and

maintenance”.

The iron leaves a

shine or an imprint on

the garment.

The surface to be ironed was

uneven, for instance because

you ironed over a seam or a

fold in the garment.

The iron is safe to use on all ironable

garments. The shine or imprint is not

permanent and disappears when you

wash the garment. Avoid ironing over

seams or folds. You can also place a

cotton cloth over the area to be ironed to

avoid imprints.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips GC4932 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info