Bedienungsanleitung Philips GC6405 (Seite 9 von 140) (Englisch, Polnisch)

445963

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

Symbol on laundry

care label

Type of fabric Temperature

setting

Steam setting

(specic

types only)

Z Please note that Z on the label

means that the article cannot be

ironed.

- -

If you do not know what kind or kinds of fabric an article is made of, determine the right ironing

temperature by ironing a part that is not visible when you wear or use the article.

Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches.

Start ironing the articles that require the lowest ironing temperature, such as those made of

synthetic bres.

3 Put the mains plug in an earthed wall socket and set the on/off switch to ‘I’.

, The steam tank and the soleplate heat up.

, When the temperature light goes out, the iron has reached the set temperature. As soon as

the water in the steam tank is ready for steam ironing:

- GC6450/GC6440: the ‘steam ready’ light goes on.

- GC6433/GC6430/GC6420/GC6410/GC6406/GC6405: the power-on light in the on/off switch

goes out.

Note: During steam ironing, the temperature light goes on from time to time. This indicates that the iron

is heating up to the set temperature.

Note: If you have been ironing at a high temperature and then set the temperature dial to a lower

setting, wait until the temperature light goes on and goes out again before you continue ironing. This

prevents damage to your fabrics.



- If the fabric consists of various kinds of bres, always select the temperature required by the

most delicate bre, i.e. the lowest temperature. For example: if an article consists of 60%

polyester and 40% cotton, it should be ironed at the temperature indicated for polyester ( 1)

and without steam.

- When you steam iron woollen fabrics, shiny patches may occur. To prevent this, use a dry

pressing cloth or turn the article inside out and iron the reverse side.

- Iron velvet and other fabrics that tend to acquire shiny patches in one direction only (along with

the nap) while you apply very little pressure.

- Do not use steam when you iron coloured silk. This could cause stains.





1 Make sure that there is enough water in the steam tank.

2 Set the required ironing temperature (see chapter ‘Preparing for use’).

Note: Steam ironing is only possible at higher ironing temperatures (temperature settings 2 to MAX).

3 Put the mains plug in an earthed wall socket and set the on/off switch to ‘I’.

- The power-on light in the on/off switch and the temperature light on the iron go on to indicate

that the steam tank and the iron start to heat up.

4 Specic types only: Select a steam setting suitable for the selected ironing

temperature: (Fig. 11)

- Select steam setting ECO for temperature setting 2.

 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips GC6405 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips GC6405

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info