Bedienungsanleitung Philips GC7031 (Seite 9 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Finnisch)

561029

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Problem Possible cause Solution

The appliance has

switched off.

The safety auto-off function

was activated. This happens

automatically when the steam

generator has not been used

for more than 5 minutes.

Set the on/off switch to ‘off ’ position and

then to ‘on’ position.

The appliance

produces a loud

pumping sound.

The water tank is empty. Fill the water tank with water and press the

steam trigger until the pumping sound

becomes softer and steam comes out of

the soleplate.

Water droplets

come out of the

soleplate.

After the Calc-Clean process,

remaining water may drip out

of the soleplate.

Wipe the soleplate dry with a piece of

cloth. If the light in the Calc-Clean button

still ashes and the appliance still beeps,

perform the Calc-Clean process (see

chapter ‘IMPORTANT - Cleaning and

maintenance’).

The Calc-Clean process has

not been completed.

You have to perform the Calc-Clean

process again (see chapter ‘IMPORTANT -

Cleaning and maintenance’).

Dirty water and

impurities come

out of the

soleplate.

Impurities or chemicals

present in the water have

deposited in the steam vents

and/or soleplate.

Perform the Calc-Clean process regularly

(see chapter ‘IMPORTANT - Cleaning and

maintenance’).

Water ushes out

of the soleplate.

You have accidentally started

the Calc-Clean process (see

chapter ‘IMPORTANT -

Cleaning and maintenance’).

Switch off the appliance. Then switch it

back on again. Let the iron heat up until the

‘iron ready’ light lights up steadily.

The Calc-Clean

process does not

start.

You have not pressed the

Calc-Clean button for

2 seconds until the

appliance started beeping.

See chapter ‘IMPORTANT - Cleaning and

maintenance’.

The iron leaves a

shine or an imprint

on the garment.

The surface to be ironed was

uneven, for instance because

you were ironing over a seam

or a fold in the garment.

Perfect Care is safe on all garments.

The shine or imprint is not permanent and

will disappear when you wash the garment.

Avoid ironing over seams or folds or you

can place a cotton cloth over the area to

be ironed to avoid imprints.

The ironing board

cover becomes

wet or water

droplets come out

of the soleplate.

Steam has condensed on the

ironing board cover after a

long ironing session.

Replace the ironing board cover if the foam

material has worn out. You can also add an

extra layer of felt material under the ironing

board cover to prevent condensation on

the ironing board.

You may have an ironing

board that is not designed to

cope with the high steam rate

of the steam generator.

Put an extra layer of felt material under the

ironing board cover to prevent

condensation on the ironing board.

ENGLISH 9

4239_000_9295_5_Booklet Simple_A5_v1.indd 9 03/11/16 15:13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips GC7031 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips GC7031

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info