Bedienungsanleitung Philips GC7035 (Seite 7 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Finnisch)

561028

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

IMPORTANT - Cleaning and maintenance

Smart Calc-Clean System

Your appliance has been designed with a Smart Calc-Clean system to ensure that descaling and

cleaning is done regularly. This helps to maintain a strong steam performance and avoids dirt and

stains coming out of the soleplate over time. To ensure that the cleaning process is performed, the

steam generator gives regular reminders. Besides that, a second defence step to protect the steam

generator from scale is integrated: the steam function gets disabled if descaling is not done after

1 hour steam ironing once the reminder came up. After descaling is done, the steam function will

be restored. This takes place regardless of the type of water used.

Sound and light Calc-Clean reminder

- After 1 to 3 months of use, the light of the Calc-Clean button starts ashing and the appliance

starts beeping to indicate that you have to perform the Calc-Clean process (Fig. 6).

- You can continue steam ironing for 1 hour while the Calc-Clean light ashes and the appliance

beeps. After 1 hour, the steam function is automatically disabled. You have to perform the

Calc-Clean process before you can continue steam ironing. (Fig. 7)

Performing the Calc-Clean process with the Calc-Clean container

Do not leave the appliance unattended during the Calc-Clean process.

Caution: Do not interrupt the process by lifting the iron up from the Calc-Clean container,

as hot water and steam will come out of the soleplate.

1 Fill up the water tank halfway (Fig. 8).

Make sure that the appliance is plugged in and switched ON during the Calc-Clean process (Fig. 9).

Place the Calc-Clean container on the ironing board or any other even, stable surface (Fig. 10).

4 Place the iron stably on the Calc-Clean container.

5 Press and hold the Calc-Clean button for 2 seconds until you hear short beeps (Fig. 11).

Note: The Calc-Clean container has been designed to collect scale particles and hot water during the

Calc-Clean process. It is perfectly safe to rest the iron on this container during the entire process.

6 During the Calc-Clean process, you hear short beeps and a pumping sound.

Wait approximately 2 minutes for the appliance to complete the process (Fig. 12).

7 When the Calc-Clean process is completed, the iron stops beeping (Fig. 13).

8 Wipe the iron with a piece of cloth and put it back on the base station (Fig. 14).

9 As the Calc-Clean container becomes hot during the Calc-Clean process, wait approx.

5 minutes before you touch it.

10 Carry the Calc-Clean container to the sink, empty it and store it for future use (Fig. 15).

11 If necessary, you can repeat steps 1 to 10. Make sure that you empty the Calc-Clean

container before you start the Calc-Clean process.

Note: During the Calc-Clean process, clean water may come out of the soleplate if no scale has

accumulated inside the iron. This is normal.

ENGLISH 7

4239_000_9295_5_Booklet Simple_A5_v1.indd 7 03/11/16 15:13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips GC7035 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips GC7035

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info