Bedienungsanleitung Philips GC7053 (Seite 5 von 70) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

696550

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

IMPORTANT - Cleaning and maintenance

Smart Calc-Clean System

Your appliance has been designed with a Smart Calc-Clean system to ensure that

descaling and cleaning is done regularly. This helps to maintain a strong steam

performance and avoids dirt and stains coming out of the soleplate over time. To

ensure that the cleaning process is performed, the steam generator gives regular

reminders. Besides that, a second defence step to protect the steam generator from

scale is integrated: the steam function gets disabled if descaling is not done after

1 hour steam ironing once the reminder came up. After descaling is done, the steam

function will be restored. This takes place regardless of the type of water used.

Sound and light Calc-Clean reminder

- After 1 to 3 months of use, the light of the Calc-Clean button starts ashing and

the appliance starts beeping to indicate that you have to perform the Calc-Clean

process (Fig. 6).

- You can continue steam ironing for 1 hour while the Calc-Clean light ashes and

the appliance beeps. After 1 hour, the steam function is automatically disabled.

You have to perform the Calc-Clean process before you can continue steam

ironing. (Fig. 7)

Performing the Calc-Clean process with the Calc-Clean container

Do not leave the appliance unattended during the Calc-Clean process.

Always perform the Calc-Clean process with the Calc-Clean container. Do not

interrupt the process by lifting the iron up from the Calc-Clean container, as hot

water and steam will come out of the soleplate.

1 Fill up the water tank halfway (Fig. 8).

Note: Make sure that the appliance is plugged in and switched ON during the

Calc-Clean process.

2 Place the Calc-Clean container on the ironing board or any other even, stable

surface (Fig. 9).

3 Place the iron stably on the Calc-Clean container (Fig 10).

4 Press and hold the CALC-CLEAN button for 2 seconds until you hear short

beeps (Fig. 11)

Note: The Calc-Clean container has been designed to collect scale particles and

hot water during the Calc-Clean process. It is perfectly safe to rest the iron on this

container during the entire process.

5 During the Calc-Clean process, you hear short beeps and a pumping sound

(Fig.12)

6 Wait approximately 2 minutes for the appliance to complete process. When the

Calc-Clean process is completed, the iron stops beeping and the CALC-CLEAN

light stops ashing (Fig. 13).

7 Wipe the iron with a piece of cloth (Fig. 14). Put the iron back on the base

station.

Caution: The iron is hot.

8 As the Calc-Clean container becomes hot during the Calc-Clean process, wait

approx. 5 minutes before you touch it. Then carry the Calc-Clean container to

the sink, empty it and store it for future use (Fig 15).

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips GC7053 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info