Bedienungsanleitung Philips GC7846 (Seite 7 von 74) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

751629

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

Cleaning and maintenance

Smart Calc-Clean System

Your appliance has been designed with a Smart Calc-Clean system to ensure that descaling and

cleaning is done regularly. This helps to maintain a strong steam performance and prevents dirt and

stains coming out of the soleplate over time. To ensure that the cleaning process is performed, the

steam generator gives regular reminders.

Sound and light Calc-Clean reminder

After 1 to 3 months of use, the Calc-Clean light starts ashing and the appliance starts beeping to

indicate that you have to perform the Calc-Clean process (Fig. 15).

Besides that, a second defense step to protect the steam generator from scale is integrated: the steam

function gets disabled if descaling is not done (Fig. 16). After descaling is done, the steam function will

be restored. This takes place regardless of the type of water used.

Note: The Calc-Clean process can be performed at any time, even when the sound and light reminder

is not activated yet.

Performing the Calc-Clean process with the Calc-Clean

container

Warning: Do not leave the appliance unattended during the Calc-Clean process.

Caution: Always perform the Calc-Clean process with the Calc-Clean container. Do not interrupt

the process by lifting the iron up from the Calc-Clean container, as hot water and steam will come

out of the soleplate.

1 Fill up the water tank halfway (Fig. 17).

Note: Make sure that the appliance is plugged in and switched ON during the Calc-Clean process.

2 Place the Calc-Clean container on the ironing board or any other even, stable surface (Fig. 18).

3 Place the iron stably on the Calc-Clean container (Fig. 19).

4 Press and hold the CALC-CLEAN button for 2 seconds until you hear short beeps (Fig. 20).

Note: The Calc-Clean container has been designed to collect scale particles and hot water during

the Calc-Clean process. It is perfectly safe to rest the iron on this container during the entire

process.

5 During the Calc-Clean process, you hear short beeps and a pumping sound (Fig. 21).

6 Wait approximately 2 minutes for the appliance to complete the process (Fig. 22). When the Calc-

Clean process is completed, the iron stops beeping and the CALC-CLEAN light stops ashing.

7 Wipe the iron with a piece of cloth and put it back on the base station (Fig. 23).

Caution: The iron is hot.

8 As the Calc-Clean container becomes hot during the Calc-Clean process, wait approx. 5 minutes

before you touch it. Then carry the Calc-Clean container to the sink, empty it and store it for future

use (Fig. 24).

9 If necessary, you can repeat steps 1 to 8. Make sure that you empty the Calc-Clean container

before you start the Calc-Clean process.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips GC7846 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info