Bedienungsanleitung Philips GC8643 - PerfectCare Aqua (Seite 7 von 44) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Finnisch)

600020

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Energy saving - ECO mode

By using the ECO mode (reduced amount of steam), you can save energy without compromising

on the ironing result..

Note: For the shortest ironing time, we advise you to use the ‘OptimalTemp’ mode.

1 Press the ECO button when the appliance is switched on (Fig. 4).

2 To go back to the ‘OptimalTemp’ mode, press the ECO button again.

Safety auto-off mode (specic types only)

To save energy, the steam generator switches off automatically when it has not been used for

10 minutes. The light in the on/off button ashes.

To reactivate the steam generator, press the on/off button.

IMPORTANT - cleaning and maintenance

Descaling the appliance

When DE-CALC light is ashing, perform the descaling procedure.This helps to prolong the lifetime

of the appliance and optimise the ironing performance.

If your water is very hard, increase the descaling frequency.

To avoid any risk of burns, make sure the appliance has been unplugged for at least 2 hours and

has completely cooled.

Tip: When you perform the descaling procedure, place the appliance on the edge of the table top or near

the sink. Water may ow out of the appliance when the EASY DE-CALC knob is opened.

1 Hold a cup under the EASY DE-CALC knob and turn the knob anti-clockwise. (Fig. 5)

2 RemovetheEASYDE-CALCknobandletthewaterwithscaleparticlesowintothecup(Fig.6).

3 When no more water comes out of the appliance, reinsert the EASY DE-CALC knob and

tighten it. (Fig. 7)

Descaling the soleplate

If you do not descale your appliance regularly, you may see brown stains coming out of the soleplate

due to scale particles. Descale the soleplate by following the procedure below. We advise you to

repeat the procedure twice for better results.

1 Make sure the appliance is cool and clean the soleplate with a damp cloth.

2 Emptythewatertankthroughthellingdoor.TilttheapplianceandremovetheEASY

DE-CALC knob. Pour 500ml distilled water into the DE-CALC opening and tighten the

EASY DE-CALC knob. (Fig. 8)

3 Switch on the appliance and wait for 5 minutes.

4 Keep the steam trigger pressed continuously while you iron a piece of thick cloth in a

back-and-forth motion for 3 minutes. (Fig. 9)

Hot, dirty water comes out of the soleplate.

5 Stop cleaning when no more water comes out of the soleplate or when steam starts coming

out of the soleplate.

6 Unplug the steam generator and let it cool down for at least 2 hours. Remove the EASY

DE-CALCknobandlettheremainingwaterowout.TightentheEASYDE-CALCknob.

ENGLISH 7

4239_000_8862_1_DFU-Booklet_A5_v1.indd 7 11/1/13 1:55 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips GC8643 - PerfectCare Aqua Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info