Bedienungsanleitung Philips GC9300 series (Seite 7 von 50) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Finnisch)

696506

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

2 When no more water comes out of the appliance, reinsert the EASY DE-CALC knob and tighten it

(Fig. 19).

Descaling the soleplate

If you do not descale your appliance regularly, you may see brown stains coming out of the soleplate

due to scale particles. Descale the soleplate by following the procedure below. We advise you to

perform the procedure twice for better results.

1 Make sure the appliance is cool and clean the soleplate with a damp cloth.

2 Empty the water tank through the lling door (Fig. 20). Tilt the appliance and remove the EASY DE-

CALC knob.

3 Pour 500ml distilled water into the DE-CALC opening and tighten the EASY DE-CALC knob (Fig. 21).

4 Fill up the water tank halfway. Switch on the appliance and wait for 5 minutes.

5 Keep the steam trigger pressed continuously while you iron a few pieces of thick cloth in a back-

and-forth motion for 3 minutes (Fig. 22).

Warning: Hot, dirty water (about 100-150 ml) comes out of the soleplate.

6 Stop cleaning when no more water comes out of the soleplate or when steam starts coming out of

the soleplate.

7 Unplug the steam generator and let it cool down for at least two hours. Remove the EASY DE-CALC

knob and let the remaining water ow out. Tighten the EASY DE-CALC knob.

Storage

1 Switch o the appliance and unplug it.

2 Pour the water out of the water tank through the lling door (Fig. 20).

3 Fold the supply hose.

4 Wind the supply hose inside the supply hose storage compartment (Fig. 23).

5 Fold the mains cord and fasten it with the Velcro strip.

6 Place the iron on the iron platform and lock it by pushing the carry lock release button (Fig. 24).

7 You can carry the appliance with one hand by the handle of the iron when the iron is locked on the

iron platform (Fig. 25).

Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you

are unable to solve the problem with the information below, visit www.philips.com/support for a list

of frequently asked questions or contact the Consumer Care Center in your country.

Problem Cause Solution

Dirty water, brown stains

or white akes come out

of the soleplate.

Scale has built up inside the

appliance because it has not been

descaled regularly.

Descale the appliance and the

soleplate (see chapter 'Cleaning

and maintenance').

You have put chemicals or additives

in the water tank.

Never use chemical or additives

with the appliance. If you have

already done so, follow the

procedure in chapter 'Cleaning

and maintenance' to remove the

chemicals.

There is no or little steam. The appliance has not heated up

suciently.

Wait until the iron ready light

stays on continuously. This takes

approx. 2 minutes.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips GC9300 series Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info