9
Guarantee restrictions
The following parts are not covered by the terms of the international guarantee.
- tanning lamps
- acrylic plates, including cleaning costs
ENGLISH
Possible causes
The plug has not been properly inserted into the wall socket.
There is a power failure. Check if the power supply works by
connecting another appliance.
The timer has not been set.
Connecting cable (J) has not been plugged in (correctly).
Check the fuse of the circuit to which the appliance is connected.
The correct fuse type is a 16A standard fuse or an automatic fuse.
You are using an extension cord that is too long or does not have
the correct current rating. Consult your dealer. Our general advice
is not to use an extension cord.
You are not following the tanning schedule suitable for your skin
type. Check the table in 'Tanning sessions: how often and how
long?'
When the lamps have been used for a long time, the UV light
emitted will decrease.This effect only becomes noticeable after
several years.You can solve this problem by selecting a slightly
longer tanning time or by replacing the lamps.
Problem
The appliance does not start.
The canopy starts, but the couch does not.
The fuse cuts off the power when the
appliance is switched on or during use.
Poor tanning result.
Troubleshooting
If the appliance has not been installed or is not used in accordance with the instructions, it
may fail to work properly. In that case you will be able to solve the problem yourself by
following the troubleshooting tips below.
If the problem is not mentioned in the list, the appliance may not work properly because it
has a defect. In that case we advise you to contact your dealer or an authorised service
centre.