Extra facilities
• Interruption of the tanning session (e.g. telephone)
(fig. 22, 23).
• Press button fi.
The sun lamps are now switched off. The blink signal d is
no longer visible.
The remaining tanning session time is displayed blinking.
• After three minutes the blinking stops.Subsequently you can
restart the sun lamps by pressing button I.
• Using the solarium shorter
than the set time? (fig. 24)
- Press button I. The sun
lamps are now switched off.
Set the new session time.
- Wait until the time reading in
the display stops blinking.
Then press push button I
again.
After the UV tanning session
Memos (fig. 25).
- On one of the session
memos Q you can note
down how many sessions
you have had. There are
four such memos, for four
users.
- Let the solarium cool down
for 15 minutes before
folding it up and storing it
away.
In the meantime you can
store the mains cord and
the remote control unit in
the lower casing. Be
careful to ensure that they
do not get stuck when the
appliance is folded in.
Making the solarium transportable
You can fold in the solarium and make it transportable in the
following manner:
- Hold the upper part of the stand with one hand. Loosen the
locking screw G (one or two turns anti-clockwise) (fig. 26).
- Slide in the stand fully (fig. 27)...
... and tighten the locking screw G by turning it clockwise
(fig. 28).
- Fold the two upper casings towards each other (fig. 29).
- Move the upper part of the
appliance first backwards
(fig. 30) and then
downwards (fig. 31).
(See the arrows.)
- Finally fasten the upper
casings to the stand by
closing the clips (fig. 32).
(Press to close.)
- If so required, you can
lock the clips with the key
provided.
After use you can store the solarium e.g. (horizontally) under a
bed or (vertically) in a cupboard.
9
