Using the appliance
1 Fully unwind the mains cord.
2 Put the plug in the wall socket.
◗ The remote control will show all the functions that need to be adjusted by the user.The
tanning or relax time is shown as 00 (fig. 15).
◗ Only types HB951 and HB952 show the symbol ª: the symbol to tan your face.
◗ Only types HB952 and HB955 show the symbol º: the symbol to tan a part of the body .
◗ Only type HB955 shows the symbol – (relax).
Adjusting functions
1 Use the ¡™buttons to switch from function to function (fig. 16).
The underlined symbol shows the function you are programming.
2 Selecting tanning, facial tanning, tanning a part of the body or relaxing.
Choose symbol • if you want to tan your whole body.
Choose symbol • and ª if you want to tan your whole body and give your face an extra tan (types
HB951 and HB952).
Choose º if you want to tan just a part of the body (types HB952 and HB955 only).
Choose symbols ª and º if you want to tan just a part of the body, including an extra facial tanning
(type HB952 only).
Choose symbol – if you prefer a relax session (warmth) for the whole body (type HB955 only).
Note: In these directions for use, functions ;ªare used as examples of what may be shown on the
display.
Setting the time for a tanning or relax session.
1 Set the time of the tanning or relax session by pushing the + button to put the time forward
or by pushing the - button to put the time backward (fig. 17).
Keep the button pressed in to adjust the time more quickly.
2 Lie down directly under the lamp units of the appliance to ensure that the sides of your body
are also tanned properly.
3 Put on the protective goggles provided.
4 Switch on the tanning lamps or the infrared lamps by pressing the start button ∞ (fig. 18).
B
Note: During start-up the tanning lamps may produce a humming sound.This sound will stop as
soon as the lamps are burning properly.
B
Note:The tanning lamps will start to emit a visibly stronger light after about 60 seconds, which
means they are now burning at full power. From this moment onwards you can switch the facial
tanner on or off.
B
Note: If the lamps fail to go on after about 20 seconds, switch the appliance off (∞), let the
lamps cool down for 3 minutes, set the tanning time and switch the appliance back on again
(∞).
◗ A blinking signal will appear; the set time is shown on the display (25 minutes in this case)
(fig. 19).
The countdown of the set tanning or relax time will now start.
◗ You can switch the facial tanner (• , ª) on or off during the session without having to switch
off the whole appliance (fig. 20).
B
(This also holds for the extra face tan in combination with º).
The chosen symbols stay visible in the display, but the other symbols do not.
◗ During the last minute of the session you will hear an intermittent beeping sound (fig. 21).
ENGLISH8