C
8 Make sure that the levers return fully to their most outward
position by pushing firmly on the lid.
C
9 Place one cup or two cups under the outflow openings.
The cups you use should have a capacity of at least 4.5 fl. ounce.
The pilot light of the on/off button I blinks slowly when the water is
heating up.
The appliance is ready for use when the pilot light burns continuously.
If the pilot light blinks rapidly, check whether:
◗ The water reservoir has been (properly) placed onto the
appliance.
C
◗ There is enough water in the water reservoir.The water reservoir
must at least be filled up to the MIN indication.
C
10 Press the button indicating the number of cups you want to
brew.
° for one cup
°° for two cups
B
The appliance starts brewing.
The appliance automatically supplies the optimal amount of water.
You can interrupt the brewing process at any time by pressing the
on/off button I.
When you switch the appliance back on after having interrupted the
brewing process, the appliance will not complete the interrupted
brewing cycle.
If the appliance stops brewing when you are making two cups of
coffee, yet the cups are only half full, there was not enough water left in
the water reservoir. Fill the water reservoir and press button ° for
one cup.The two cups will then be filled completely.
C
11 Remove the coffee pads after use by lifting the pad holder out
of the appliance and emptying it.
ENGLISH10
