Solution
Make sure that the hole in the centre of the pod holder is not clogged.
If it is, unclog the hole by holding the pod holder under a running tap. If
necessary, you can use a washing-up brush or a pin to unclog the hole.
If problems continue to occur, contact the Philips Customer Care
Centre in your country.
Descale the machine (see 'Descaling').
Check if a used coffee pod is sticking to the water distribution plate. If
this is the case, remove the used pod.
Contact the Philips Customer Care Centre in your country.
Make sure that:
you have used the correct number of pods and have pressed the right
button. Use 1 pod in combination with the 1-cup pod holder and the
¿ button. Use 2 pods in combination with the 2-cup pod holder and
the ¿¿ button;
the coffee pod(s) has/have been placed properly in the centre of the
pod holder, to prevent water from escaping along de edge of the
pod(s).When you are using two coffee pods on top of each other,
make sure that the convex sides of both pods are pointing downwards
and press the pods lightly into the pod holder;
you have not used the same pod twice by accident;
the coffee in the pod is evenly distributed;
If you prefer a more robust flavour, Senseo\ coffee pods with a
stronger blend are available.
If you prefer a milder flavour, Senseo\ coffee pods with a milder blend
are available.
Do not use cups that are too large, as they will cause the coffee to get
cold more quickly.When using cups, make sure they have a capacity of
150 ml.When using a mug, make sure it has a capacity of 280 ml.
Problem
The coffee machine produces less coffee than
before.
The lid cannot be closed properly.
The machine has been stored in a room that
was not frost-free.
The Senseo\ coffee is not strong enough.
The Senseo\ coffee is too strong
The coffee is not hot enough
ENGLISH 15
