Bedienungsanleitung Philips HDP1590TV (Seite 31 von 38) (Englisch)

546063

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

Settings 31

11 Settings

1 Switch the device on using the on/off key.

2 After the initial screen the main menu appears.

3 Use the navigation keys to select Settings.

4 Confirm with OK.

5 Use / to select from the following settings.

6 Confirm with OK.

7 Modify the settings using OK, /,

8 Confirm with OK.

The ¿ key takes you one step back in the menu.

Overview of the Menu

Functions

Wireless and Network

WiFi – switching the wireless network (WLAN) off and

on.

Network Selection – select the wireless network with

which the device is to connect.

WiFi Hot Spot – activate and deactivate WLAN teth-

ering.

LAN – switching the LAN network (LAN) off and on.

Advanced – (LAN mode only) check the Network

actual IP address or change the address by inputting

new address. You can also select Automatic or Use

static IP

DLNA Sharing – switching DLNA off and on.

Bluetooth – switching the Bluetooth connection off

and on.

Image settings

3D – set the picture modes with 2D/3D options.

Keystone – use / to set the keystone.

Fit Screen – use / to select the screen mode

Projection mode

Front – normal projection; the device is located in

front of the projection surface/screen

Rear – rear projection; the device is located behind

the projection surface; the image is reflected hori

zontally.

Front Ceiling – the device is hanging from the ceiling

in an upside-down position; the image is rotated by

180 degrees.

Rear ceiling – the device is located behind the pro-

jection surface, hanging from the ceiling in an upside-

down position; the image is rotated by 180 degrees

and reflected horizontally.

Wall color correction – colour correction of the pro-

jected image to adjust to coloured projection surfaces

Smart Settings – select predefined settings for bright-

ness / contrast / colour saturation. If you modify these

settings, the setting is switched to Manual.

Brightness – use / to adjust the brightness and

press OK to confirm.

Contrast – use / to adjust the contrast and press

OK to confirm.

Advanced

Colour temperature – set to Warm to enhance

hotter colors such as red, or set to Cool to make

picture bluish.

Smart Brightness – use / to adjust the smart

brightness and press OK to confirm.

Dynamic contrast – adjusts the contrast to keep it

at the best level according to the brightness of the

screen.

Color space – to convert the color space setting to

another standard.

Gamma – adjusts the gamma correction according

to the type of the projected image.

Sound Settings:

Volume – adjust the volume

Deep Bass – switching the deep bass on and off

Wide sound – switching the wide sound on and off

Equalizer – select the equalizer mode

Smart volume – turn on/off the volume level automatic

control function

Key beep – turn key tones on and off

Speaker – switching the speaker on and off

System settings

Date and time – set date and time

Android Settings – set Android system

Sleep mode – With this function, the projector auto-

matically goes to ECO mode after a specified period of

time or at the end of a movie.

Auto Power Down – turn on/off the sleep mode.

The default setting is off.

LU Screeneo_EN.book Page 31 Jeudi, 15. mai 2014 10:45 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips HDP1590TV Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips HDP1590TV

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info