Bedienungsanleitung Philips HDP2510 - Screeneo 2.0 (Seite 27 von 36) (Englisch)

639197

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Settings 27

Front Ceiling – the device is hanging from

the ceiling in an upside-down position; the

image is rotated by 180 degrees.

Rear ceiling – the device is located behind

the projection surface, hanging from the ceil-

ing in an upside-down position; the image is

rotated by 180 degrees and reflected hori-

zontally.

Sleep mode



Adjusts the time until the projector should go

into sleep mode and powers off after ten

seconds if user doesn’t stop it. The following

options are available: Off, 30 min., 45 min.,

60 min., 120 min.

Screen saver



Adjusts the time until the system should

power down the lamp if no source is con-

nected to system. The followings options are

available: Off, 1 min., 2 min., 5 min., 10 min.,

30 min.

Auto power down (APD)



Switches the auto power down On and Off.

When the function is switched on, the pro-

jector should go into off mode after three

hours.

If a video is displayed, the APD should take

place three hours after last user action,

meaning that a pop-up will appear after

2:58 hours for two minutes, indicating that

the device will go into off mode.

Reset lamp timer



Resets the lamp timer of the system.

Language/language



Selects the desired language.

Shop Mode



Switches the shop mode On and Off.

In this mode, the Screeneo logo is continu-

ously displayed on the screen and system

powers on after power is available. System is

set to shop mode conditions and settings are

set back to default settings after a certain

period of time.

Firmware update



Updates firmware (see Update firmware

with USB storage medium, page 19).

Information



Displays an overview of the status and ver-

sion of the device.

Reset functions

You can select between two different reset

functions:

Reset image settings

This function resets the current chosen Smart

settings back to default mode.

1 Press the OPTION/Ă button and use ¡/¢

to select Image.

2 Confirm with OK.

3 Use ¡/¢ to select Smart settings.

4 In the status bar appears Reset current

image settings.

5 Use À/Á to select Standard*.

6 Confirm with the RED key.

Notice

The default setting is depending on the

choice of Shop mode or Home mode

(see Initial installation, page 14).

CAUTION!

Do not reset the lamp timer if the lamp

has not been replaced as this could

cause damage

(see Resetting the lamp

timer, page 30).

Source

Image

Sound

System

Information

Source

Smart settings

3D settings

Equivalent lamp hour

Resolution

Firmware version

Engine version

MCU version

Model

HDMI1

Standard

0 h

1920 x 1080

V1.0

V1.111

V1.11111

HDP2510

Information

Reset current image settings

Source

Image

Sound

System

Information

Smart settings

Format

Brightness

Contrast

Saturation

Sharpness

Lamp power mode

Flow motion

Wall colour correction

Advanced colour settings

Standard

Original

Standard

OFF

Image settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips HDP2510 - Screeneo 2.0 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips HDP2510 - Screeneo 2.0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info