Bedienungsanleitung Philips HDRW720 (Seite 15 von 115) (Englisch)

35638

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

Connecting to the TV (alternative configurations)

Connection via composite video (CVBS)

cable

This cable, usually with yellow Cinch connectors, transmits a

Composite Video signal (FBAS, CVBS). The colour signal and the

brightness signal are transmitted on the same cable. In certain

circumstances, this can lead to slight problems with the picture, such as

'Moiré' patterns.

1 Insert one end of a video (CVBS) cable

E into VIDEO OUT

(CVBS)

P (yellow cinch socket) at the back of the DVD

recorder and the other end into the video input socket (usually

yellow) on the TV (usually labelled 'Video in' or 'AV in'. See TV

operating instructions).

2 Insert one end of an audio (Cinch) cable

F into AUDIO OUT

L/R

Q (red/white Cinch socket) at the back of the DVD recorder

and the other end into the audio input socket (usually red/white)

on the TV (usually labelled 'Audio in' or 'AV in'. See TV operating

instructions).

O Read the next chapter 'Connecting additional devices' on how

to connect additional devices (satellite receivers,

videorecorders,...) to the input-/output sockets.

Then, read the chapter on 'Connecting to the mains'.

Connection via a SVideo (Y/C) cable

This cable, transmits the brightness (Y signal) and colour (C signal)

separately. This mini DIN socket/plug is also called a Hosiden

socket/plug.

1 Insert one end of an S-Video(SVHS) cable

G into the S-VIDEO

OUT (Y/C)

O socket at the back of the DVD recorder and the

other end into the S-Video (SVHS) input socket on the TV (usually

labelled 'S-Video in' or 'SVHS in'. See TV operating instructions).

2 Insert one end of an audio (Cinch) cable

F into the AUDIO

OUT L/R

Q (red/white Cinch socket) at the back of the DVD

recorder and the other end into the audio input socket (usually

red/white) on the TV (usually labelled 'Audio in' or 'AV in'. See TV

operating instructions).

O Refer to 'Connecting additional devices' to connect devices

like satellite receivers and videorecorders to the input-/output

sockets.

Proceed to 'Initial Installation'.

Connection via a component video

(Y Pb Pr/YUV) cable (no progressive scan)

If you choose this type of connection, the DVD recorder must

already be connected and completely installed (Initial

Installation complete).

Switching the signal to the COMPONENT VIDEO OUT

R sockets

is carried out in a menu that is not available until the Initial Installation

is complete.

Component video (Y Pb Pr) is the highest quality picture transmission

option. The video and two colour difference signals are transmitted

through separate lines. The connectors and corresponding sockets are

usually green (Y), blue (U), and red (V).

Preparation:

•) Switch on the TV, and if necessary, select channel assigned to the

DVD recorder.

•) Switch on the DVD recorder.

1 Press the DISC MENU

B and then the SYSTEM

A buttons on the remote control.

P The menu bar appears.

2 Select '

' symbol with D K .

ENGLISH

Installation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips HDRW720 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips HDRW720

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info