Bedienungsanleitung Philips HDRW720 (Seite 26 von 115) (Englisch)

35638

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

Installing the 'External receiver 1'

Setup Home

Press Aor Bto select. Then press OK to confirm.

Setup

Choose item to set up :

Language English

Country United Kingdom

Postal code XXXXX

External receiver 1 None

External receiver 2 None

External receiver 3 None

If you have connected an external receiver (satellite receiver, set-top

box, cable TV box), you must also install it in the GUIDE Plus+

system. TV programmes (TV channels) that you can only watch via the

receiver can also be displayed in the GUIDE Plus+

system and be

programmed for recording.

You can connect up to three external receivers to this DVD-Recorder.

My receiver does not display the programme number

During the installation procedure you will be asked if the external receiver

has switched over to a different programme number. If your external

receiver has no indication on the display of the programme number, proceed

as follows:

- Press GUIDE/TV

J to exit the GUIDE Plus+

system.

- Press TUNER

0 to switch to the internal tuner.

- Select on the DVD-Recorder the socket where the receiver is connected

using CHANNEL q

P , CHANNEL r S (e.g. 'EXT2' for

EXT2 AUX-I/O

M )

If the receiver is connected with the aerial cable only, select the

programme number under which the external reciever is stored in the

DVD recorder.

- Press GUIDE/TV

J to call up the GUIDE Plus+

system.

- Press A

I and select with C M the the setting 'Setup' with

M .

- Select 'Setup' using B

O and confirm using OK L .

1 Select with B

O or A I in the 'Setup' screen the line

'External receiver 1' and confirm with OK

L .

2 Read the information on the screen and confirm with OK

L .

3 Select the type of the external receiver.

This setting serves to preselect the type used.

This selection depends on the country and the GUIDE Plus+

system provider. Therefore, some types may have no function.

'Cable': Cable receiver, cable box.

'Satellite': Analog or digital satellite receiver.

'Terrestrial': Digital terrestrial decoder box.

'None': No external device connected.

4 Confirm with OK

L .

If you selected 'None', no external receiver is installed.

5 Select your provider from the list.

O If you do not have a provider, select 'No provider'

6 Confirm with OK

L .

7 Select the brand of your external receiver from the list. If your

provider is printed on your receiver (e.g. Sky,...), you must choose

the provider as brand.

O Depending on the brand and provider you selected, a limited

selection will appear.

O Browse through the pages of the list using

CHANNEL q

P , CHANNEL r S .

a My brand is not included in the list

b Select 'Satellite' and as provider 'No provider'.

You will see a list of all stored brands.

b If you do not find your brand, proceed as follows:

- Tune your external receiver to the TV channel which transmits the

GUIDE Plus+

data (see table in the section 'General information'). If

this TV channel is available at the internal tuner of the DVD-recorder,

select the TV channel using CHANNEL q

P ,

CHANNEL r

S .

- Wait till the GUIDE Plus+

data is loaded (24 hours) and search for

your brand again.

The control data of the external receivers are automatically updated

(completed) via the GUIDE Plus+

system. This is done through the

aerial, the cable, or the external receiver. You do not need to bring the

device to a service centre.

- If your brand is still missing, note the type and manufacturer of your

external receiver and call the customer support service in your country.

You will find the telephone number on the back of this instruction

manual.

8 Press OK

L .

9 Select the input socket of the DVD recorder to which the receiver

is connected.

O If the receiver is connected via the aerial cable only, proceed

as follows:

- Select 'Antenna (RF lead)' and confirm using OK

L .

- Enter the channel number under which the external receiver

is stored in the DVD recorder. (e.g.: channel number 'P 04').

Use the number buttons 0..9 ,or B

O , A I , D K ,

M .

If the external receiver is not allocated to a channel number, you must

search and store it in the DVD recorder as if it were a new TV channel.

Read section 'Search TV channels manually'. Please make sure that the

receiver remains switched on during search and, if necessary, switch it

on to a 'test signal'.

0 Confirm with OK

L .

O If the G-LINK transmitter was not connected to the G-LINK

socket, connect it and adjust as decribed in the chapter

'Connecting additional devices'.

Initial Installation of the GUIDE Plus+ system

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips HDRW720 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips HDRW720

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info