Bedienungsanleitung Philips HF3419 (Seite 12 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch, Norwegisch, Finnisch)

666618

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

Note: For the best results, use the highest intensity setting that is comfortable to your eyes.

Time and intensity indicator bar: version (01)

The appliance has an indicator bar with 6 segments that can show either the selected intensity level (1

to 6) or the time elapsed (0 to 60 minutes) since you switched on the appliance.

When you press the on/off button to switch on the appliance, the indicator briefly shows the set light

intensity level, followed by a transition to the time elapsed since the appliance was switched on.

Each time you press the + or - button to change the light intensity, the indicator bar briefly shows the

newly selected light intensity, followed by a transition to the time elapsed mode.

Intensity level indicator mode

The indicator bar has 6 segments. Each segment represents a light intensity level. The segment on

the left-hand side shows the lowest intensity level (1), while the one on the right-hand side shows

the highest level (6).

The segment that shows the selected light intensity level lights up solid, while the others are at a

lower light level. For example: when you switch to light intensity level 4, segment 4 will light up

solid while the others are at a lower level (Fig. 12).

Time elapsed mode

The indicator bar indicates the time elapsed since you switched on the appliance. It has 6

segments. Each segment represents 10 minutes. All segments together represent one hour.

After you switch on the light, the first segment on the left-hand side of the indicator bar flashes

slowly (Fig. 13).

After 10 minutes, the first segment lights up solid and the second segment starts flashing slowly

(Fig. 14).

This process continues, until all segments of the time indicator bar light up solid after 1 hour (Fig.

15).

Note: If you want to switch off the appliance, press the on/off button briefly.

Time indicator bar: version (02)

The time indicator shows the time elapsed from the moment you switch on the appliance. The

indicator has 6 segments. Each segment represents 10 minutes. All segments together represent one

hour.

After you switch on the light, the first segment on the left-hand side of the indicator bar flashes

slowly (Fig. 13).

After 10 minutes, the first segment lights up solid and the second segment starts flashing slowly

(Fig. 14).

This process continues, until all segments of the time indicator bar light up solid after 1 hour (Fig.

15).

Note: If you want to switch off the appliance, press the on/off button briefly.

Cleaning and storage

Do not immerse the appliance in water or any other liquid and do not rinse it under the

tap.

Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol

or acetone to clean the appliance.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips HF3419 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info