Bedienungsanleitung Philips HF3475 (Seite 9 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

670749

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Menu functions of middle selection wheel (SET)

Below you nd a description of all functions that can be set in the menu. These functions appear in

the menu in the following order:

Clock time

Alarm time

Alarm sound

Sleep timer You can use the sleep timer when you want the radio and/or lamp to stay on for a set

period of time (15 minutes to 2 hours) before you go to sleep. You can switch off the sleep timer

again by setting the sleep timer period to 00:00 or by switching off the radio and/or lamp.

Display brightness You can choose a display brightness between 1 and 4.

You can operate the function selection wheels in the following way:

1 Press the middle selection wheel (SET) to enter the menu.

2 Turn the middle selection wheel (SET) to select a function.

3 Press the middle selection wheel (SET) to enter this function.

4 Turn the middle selection wheel (SET) to select a setting.

5 Pressthemiddleselectionwheel(SET)toconrm.

Radio/volume

1 To switch on the radio, press the bottom selection wheel. (Fig. 11)

2 To select the desired radio frequency, turn the middle selection wheel (SET) (Fig. 12).

Tip: To scan radio frequencies automatically, press and hold the middle selection wheel (SET) for approx.

2 seconds.

3 To switch off the radio, press the bottom selection wheel again.

Volume

1 To set the volume turn the bottom selection wheel to select the volume level you prefer.

You can choose a volume level between 1 and 20.

Note: The volume level you have selected is automatically set as the volume level for the alarm as well.

Setting the alarm

When you set the alarm, you choose an alarm time and the type of sound you want to wake up to.

The alarm is set when the alarm symbol is visible on the display. The light intensity slowly increases

to the selected level during the last 30 minutes before the set alarm time. The sound slowly

increases in 90 seconds to the selected level after the set alarm time.

Note: You can set the light intensity or alarm volume by turning the top or bottom selection wheel

respectively. If you do not want to wake up to the lamp or to a sound, select a light intensity or volume

level of 0. See section ‘Using the lamp’ and ‘Radio/Volume’.

1 Push the control lever down to the middle position to switch the alarm on. (Fig. 13)

Thehourindicationashes(Fig.14).

To adjust the time, follow steps 2 to 5. If the alarm time is correct, just wait for a few

seconds.

2 Turn the middle selection wheel (SET) to select the hour.

Note: You can only do this when the hour indication ashes. If this is not the case, push the control lever

up and down again to enter the alarm time mode. You can also set the alarm time in the menu (see

section ‘Menu functions of middle selection wheel (SET)’ above).

ENGLISH 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips HF3475 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info