Bedienungsanleitung Philips HF3485 (Seite 11 von 172) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

670750

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

Setting the sunrise simulation time

The sunrise simulation time is the time in which the light intensity of the lamp gradually increases to

the set level before the alarm sound is played. The default sunrise simulation time is 30 minutes,

because this is the optimum time for your body to prepare for waking up. As the sensitivity to light

differs from person to person, it is possible to adjust the sunrise simulation to your own preference.

You can reduce the sunrise simulation time to 20 or 25 minutes or increase it to 40 minutes.

1 Simultanuously press and hold the light intensity increase and decrease buttons for

3 seconds (Fig. 24).

, The sunrise simulation symbol and the default sunrise simulation time of 30 minutes appears

on the display. (Fig. 25)

2 Press the menu - or + button to increase or decrease the sunrise simulation time. (Fig. 9)

3 Press the SELECT button to conrm (Fig. 10).

Snoozing

1 Tap on the surface of the Wake-Up light with the inside of your hand to snooze the appliance

(some force needs to be applied to prevent accidental snoozing) (Fig. 26).

, The lamp continues to be on at the selected intensity level, but the alarm sound stops. After

9 minutes, the alarm sound is automatically played again.

Note: The 9-minute snooze time is xed. This time cannot be adjusted.

Switching the alarm function off and on

1 To switch off the alarm function when the alarm goes off, push down the control lever to the

bottom position (Fig. 27).

Note: The lamp stays on to light your room. You can switch off the lamp by pressing the lamp on/

off button.

Note: If you forget to switch off the alarm, the alarm (sound and/or light) automatically switches off after

90 minutes.

2 If you want the alarm to go off at one of the set alarm times the next day, set the control

lever to alarm 1 or alarm 2 again.

Alarm demonstration

If you want to get a quick demonstration (60 seconds) of the gradually increasing light intensity and

sound level, activate the test function of the appliance.

1 Simultanuously press and hold the menu - or + buttons until the word TEST appears on the

display (Fig. 28).

2 Simultanuously press the menu - or + buttons again to stop the demonstration.

Note: The appliance continues to run the alarm demonstration until you press the menu + and - button

again. The test automatically stops after 9 hours.

Using the radio/playing music from a USB stick

Switching on the radio

1 To switch on the radio, press the radio on/off button (Fig. 29).

, The radio starts to play.

Note: The radio function has 3 preset stations. To select one of the preset stations, press the SELECT

button below the display.

2 To select the desired radio frequency, press the menu - or + button. (Fig. 30)

ENGLISH 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips HF3485 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info