Bedienungsanleitung Philips HI5920 (Seite 5 von 42) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

811317

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

English



Specic models in this series have the auto shut-o mode.

- To save energy, the appliance switches o automatically when it has not been used for 5 minutes. The

‘iron ready’ light ashes.

- To activate the appliance again, set the on/o switch to ‘o’ position and then to ‘on’ position. The

appliance then starts to heat up again.

Cleaning and maintenance

Smart Calc-Clean System

Your appliance has been designed with a Smart Calc-Clean system to ensure that descaling and cleaning

is done regularly. This helps to maintain a strong steam performance and prevents dirt and stains coming

out of the soleplate over time. To ensure that the cleaning process is performed, the steam generator gives

regular reminders.

Sound and light Calc-Clean reminder

After 1 to 3 months of use, the Calc-Clean light starts ashing and the appliance starts beeping to indicate

that you have to perform the Calc-Clean process )Fig. 3(.

Tip: You can continue to dry iron by not pressing the steam trigger.

Besides that, a second defense step to protect the steam generator from scale is integrated: the steam

function gets disabled if descaling is not done. After descaling is done, the steam function will be restored.

This takes place regardless of the type of water used.

Note: The Calc-Clean process can be performed at any time, even when the sound and light reminder is not

activated yet.



Warning: Do not leave the appliance unattended during the Calc-Clean process.





1 Fill up the water tank halfway )Fig. 4(.

Note: Make sure that the appliance is plugged in and switched ON during the Calc-Clean process.

2 Place the Calc-Clean container on the ironing board or any other even, stable surface.

3 Place the iron stably on the Calc-Clean container )Fig. 5(.

Note: The Calc-Clean container has been designed to collect scale particles and hot water during the

Calc-Clean process. It is perfectly safe to rest the iron on this container during the entire process.

4 Press and hold the Calc-Clean button for 2 seconds until you hear short beeps )Fig. 6(.

5 During the Calc-Clean process, you hear short beeps and a pumping sound )Fig. 7(.

6 When the Calc-Clean process is completed, the iron stops beeping and the CALC-CLEAN light stops

ashing )Fig. 8(.

7 Wipe the iron with a piece of cloth and put it back on the base station )Fig. 9(.

8 As the Calc-Clean container becomes hot during the Calc-Clean process, wait approx. 5 minutes before

you touch it. Then carry the Calc-Clean container to the sink, empty it and store it for future use )Fig. 10(.

9 If necessary, you can repeat steps 1 to 7. Make sure that you empty the Calc-Clean container before you

start the Calc-Clean process.

Note: During the Calc-Clean process, clean water may come out of the soleplate if no scale has

accumulated inside the iron. This is normal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips HI5920 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info