Bedienungsanleitung Philips hq 5705 reflex act (Seite 2 von 3) (Englisch)

369569

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

ENGLISH

Important

Read this user manual carefully before you use the

appliance and save it for future reference.

This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they

do not play with the appliance.

Use and store the appliance at a temperature

between 5°C and 35°C.

The appliance complies with the internationally

approved IEC safety regulations and can be safely

cleaned under the tap. (Fig. 1)

Be careful with hot water. Always check if the water is not

too hot, to prevent your hands from getting burnt.

Remove the batteries if you are not going to use the

appliance for a month or more.

Electromagnetic elds (EMF)

This Philips appliance complies with all standards

regarding electromagnetic elds (EMF). If handled

properly and according to the instructions in this user

manual, the appliance is safe to use based on scientic

evidence available today.

Preparing for use

The appliance runs on two R6 AA 1.5-volt batteries. We

strongly advise you to use Philips LR6 alkaline batteries.

They supply sufcient energy for approx. 60 minutes of

shaving.

Inserting batteries

1 Unlock the cap of the battery compartment (Fig. 2).

2 Remove the cap of the battery

compartment. (Fig. 3)

3 Put two batteries in the battery

compartment (Fig. 4).

Make sure your hands and the appliance are dry when

you insert the batteries.

Make sure the + and - poles of the batteries point

in the right direction

The appliance does not work if the batteries have been

placed incorrectly.

4 Push the cap of the battery compartment back

onto the appliance.

5 Lock the cap of the battery compartment (Fig. 5).

Optimising the lifetime of the battery

To avoid damage due to battery leakage:

Remove the batteries if you are not going to use the

appliance for a month or more.

Do not leave empty batteries in the appliance.

Using the appliance

1 Remove the protection cap.

2 Switch on the shaver by pushing the on/off slide

upwards (Fig. 6).

3 Move the shaving heads quickly over your

skin, making both straight and circular

movements. (Fig. 7)

Shaving on a dry face gives the best results.

Your skin may need 2 or 3 weeks to get accustomed to

the Philips shaving system.

4 Switch off the shaver by pushing the on/off slide

downwards.

5 Put the protection cap on the shaver every time

you have used it, to prevent damage (Fig. 8).

Cleaning

Regular cleaning guarantees better shaving performance.

The easiest and most hygienic way to clean the appliance

is to rinse the shaving unit and the hair chamber with hot

water every time you have used the appliance.

Never rinse the shaver when the battery compartment

is open. Always make sure the cap of the battery

compartment is in place and properly locked before you

start rinsing the shaver.

Be careful with hot water. Always check if the water is

not too hot, to prevent your hands from getting burnt.

Every day: shaving unit and hair chamber

1 Switch off the shaver.

2 Remove the shaving unit. (Fig. 9)

3 Rinse the outside of the shaving unit under a hot

tap for some time (Fig. 10).

4 Rinse the inside of the shaving unit under a hot tap

for some time. (Fig. 11)

5 Rinse the hair chamber under a hot tap for some

time. (Fig. 12)

6 Put the shaving unit back onto the shaver and shake

off excess water.

Never dry the shaving unit with a towel or tissue, as

this may damage the shaving heads.

Every six months: shaving heads

1 Switch off the shaver.

2 Remove the shaving unit (Fig. 9).

3 Turn the wheel anticlockwise (1) and remove the

retaining frame (2) (Fig. 13).

4 Remove the shaving heads from the shaving

unit. (Fig. 14)

5 Remove the guard from the cutter (Fig. 15).

6 Clean the cutters with the short-bristled side of

the brush. (Fig. 16)

Do not clean more than one cutter and guard at a time,

since they are all matching sets. If you accidentally mix up

the cutters and guards, it may take several weeks before

optimal shaving performance is restored.

7 Brush the guard. (Fig. 17)

8 Put the shaving heads back into the shaving unit. Put

the retaining frame back into the shaving unit, press

the wheel and turn it clockwise.

9 Put the shaving unit back onto the shaver.

Storage

Put the protection cap on the shaver to prevent

damage (Fig. 8).

Replacement

Replace the shaving heads every two years for optimal

shaving results.

Replace damaged or worn shaving heads with HQ64

Philips Double Action Super Lift & Cut Shaving Heads

(HQ5715) or HQ54 Philips Double Action Lift & Cut

Shaving Heads (HQ5710,5705).

1 Switch off the shaver.

2 Remove the shaving unit (Fig. 9).

3 Turn the wheel anticlockwise (1) and remove the

retaining frame (2) (Fig. 13).

4 Remove the shaving heads from the shaving unit

and replace them with new ones (Fig. 14).

5 Put the retaining frame back into the shaving unit,

press the wheel and turn it clockwise.

6 Put the shaving unit back onto the shaver.

Accessories

The following accessories are available:

HQ64 Philips Double Action Super Lift & Cut

Shaving Heads (HQ5715)

HQ54 Philips Double Action Lift & Cut Shaving

Heads (HQ5710/HQ5705)

HQ110 Philips Shaving Head Cleaning Spray (not

available in China)

Environment

Batteries contain substances that may pollute the

environment. Remove the batteries when they are

empty or when you discard the appliance. Do not

throw away the batteries with the normal household

waste, but hand them in at an ofcial collection point.

Do not throw the appliance away with the normal

household waste at the end of its life, but hand

it in at an ofcial collection point for recycling.

By doing this you will help to preserve the

environment (Fig. 18).

Guarantee & service

If you need information or if you have a problem, please

visit the Philips website at www.philips.com or contact

the Philips Customer Care Centre in your country

(you nd its phone number in the worldwide guarantee

leaet). If there is no Customer Care Centre in your

country, go to your local Philips dealer or contact the

Service Department of Philips Domestic Appliances and

Personal Care BV.

Guarantee restrictions

The shaving heads (cutters and guards) are not covered

by the terms of the international guarantee because they

are subject to wear.

Frequently asked questions

Question Answer

Why doesn’t the

shaver shave as well

as it used to?

You may not have cleaned

the appliance properly. Clean

the shaving heads thoroughly

see chapter ‘Cleaning and

maintenance’).

Long hairs may be obstructing

the shaving heads. Clean the

cutters and guards properly with

the brush supplied (see chapter

‘Cleaning and maintenance’).

The shaving heads may be

damaged or worn. Replace

the shaving heads (see chapter

‘Replacement’).

The batteries may be running

low. Replace the batteries (see

chapter ‘Preparing for use’).

Why doesn’t the

shaver switch on

when I push the on/

off button upwards?

The batteries may be empty.

Replace the batteries (see

chapter ‘Preparing for use’).

4222.002.5088.1

2/3

Philips hq 5705 reflex act Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info