Bedienungsanleitung Philips hq 804 (Seite 2 von 5) (Englisch)

369831

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

ENGLISH

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benet from the support that Philips offers,

Important

Read this user manual carefully before you use the

appliance and save it for future reference.

Warning

This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they

do not play with the appliance.

Caution

Use and store the appliance at a temperature

between 5°C and 35°C.

This shaver is not waterproof and cannot be cleaned

under the tap. Keep the shaver dry (Fig. 1).

Remove the batteries from the appliance if you are

not going to use it for quite some time.

Compliance with standards

This Philips appliance complies with all standards

regarding electromagnetic elds (EMF). If handled

properly and according to the instructions in this

user manual, the appliance is safe to use based on

scientic evidence available today.

Preparing for use

The appliance runs on two R6 AA 1.5-volt alkaline

batteries. We strongly advise you to use Philips Powerlife

batteries. They supply sufcient energy for up to 60

minutes of shaving.

Inserting batteries

1 Remove the lid of the battery compartment (Fig. 2).

2 Put two batteries in the battery

compartment (Fig. 3).

Make sure your hands and the appliance are dry when

you insert the batteries.

Make sure the + and - poles of the batteries point

in the right direction

Note: The appliance does not work if the batteries have

been placed incorrectly.

3 Put the lid of the battery compartment back onto

the appliance (‘click’).

Avoiding damage due to battery leakage

Remove the batteries if you are not going to use the

appliance for a month or more.

Do not leave empty batteries in the appliance.

Using the appliance

1 Remove the protection cap.

2 Push the on/off slide upwards to switch on the

shaver (Fig. 4).

3 Move the shaving heads quickly over your skin.

Make both straight and circular movements (Fig. 5).

Note: Shaving on a dry face gives the best results.

Note: Your skin may need 2 or 3 weeks to get accustomed to

the Philips shaving system.

4 Push the on/off slide downwards to switch off the

shaver.

5 Put the protection cap on the shaver to prevent

damage to the shaving heads (Fig. 6).

Cleaning and maintenance

Regular cleaning guarantees better shaving performance.

Every week: shaving unit and hair chamber

1 Switch off the shaver.

2 Brush the outside of the shaving unit with the

brush supplied (Fig. 7).

3 Remove the shaving unit (Fig. 8).

4 Brush the inside of the shaving unit (Fig. 9).

5 Brush the hair chamber (Fig. 10).

6 Put the shaving unit back onto the shaver.

Every two months: shaving heads

Note: Do not use cleaning agents or alcohol to clean the

shaving heads. Only use the HQ110 Shaving Head Cleaning

Spray.

1 Switch off the shaver.

2 Remove the shaving unit (Fig. 8).

3 Turn the wheel anticlockwise (1) and remove the

retaining frame (2) (Fig. 11).

4 Remove the shaving heads from the shaving unit

one by one (Fig. 12).

Note: Do not clean more than one cutter and guard at a

time, since they are all matching sets. If you accidentally mix

up the cutters and guards, it may take several weeks before

optimal shaving performance is restored.

5 Remove the cutter from the guard (Fig. 13).

6 Clean the cutter with the short-bristled side of the

brush (Fig. 14).

7 Brush the guard (Fig. 15).

8 Put the shaving heads back into the shaving unit.

9 Put the retaining frame back into the shaving unit

and turn the wheel clockwise.

10 Put the shaving unit back onto the shaver.

Tip: For optimal shaving performance, we advise you to

lubricate the shaving heads with a drop of sewing machine

oil every six months.

Storage

Put the protection cap on the shaver after use to

prevent damage to the shaving heads (Fig. 6).

Replacement

Replace the shaving heads every two years for optimal

shaving results.

Replace damaged or worn shaving heads with HQ4+

Philips Micro+ Lift & Cut Shaving Heads.

1 Switch off the shaver.

2 Remove the shaving unit (Fig. 8).

3 Turn the wheel anticlockwise (1) and remove the

retaining frame (2) (Fig. 11).

4 Remove the shaving heads from the shaving unit

and replace them with new ones (Fig. 12).

5 Put the retaining frame back into the shaving unit

and turn the wheel clockwise.

6 Put the shaving unit back onto the shaver.

Accessories

The following accessories are available:

HQ4+ Philips Micro+ Lift & Cut Shaving Heads

HQ110 Philips Shaving Head Cleaning Spray (not

available in some countries)

Environment

Do not throw away the appliance with the normal

household waste at the end of its life, but hand it in

at an ofcial collection point for recycling. By doing

this, you help to preserve the environment (Fig. 16).

Batteries contain substances that may pollute

the environment. Do not throw away empty

batteries with the normal household waste, but

dispose of them at an ofcial collection point for

batteries. Always remove the batteries before you

discard and hand in the appliance at an ofcial

collection point.

Guarantee & service

If you need information or if you have a problem, please

visit the Philips website at www.philips.com or contact the

Philips Customer Care Centre in your country (you nd

its phone number in the worldwide guarantee leaet).

If there is no Customer Care Centre in your country,

go to your local Philips dealer or contact the Service

Department of Philips Domestic Appliances and Personal

Care BV.

Guarantee restrictions

The shaving heads (cutters and guards) are not covered

by the terms of the international guarantee because they

are subject to wear.

Troubleshooting

Problem Solution

The shaver doesn’t

shave as well as it

used to.

You may not have cleaned

the appliance properly. Clean

the shaving heads thoroughly

(see chapter ‘Cleaning and

maintenance’).

Long hairs may be obstructing

the shaving heads. Clean the

cutters and guards properly

with the brush supplied

(see chapter ‘Cleaning and

maintenance’).

The shaving heads may be

damaged or worn. Replace

the shaving heads (see chapter

‘Replacement’).

The batteries may be running

low. Replace the batteries (see

chapter ‘Preparing for use’).

The shaver doesn’t

switch on when I

push the on/off slide

upwards.

The batteries may be empty.

Replace the batteries (see

chapter ‘Preparing for use’).

You may have inserted the

batteries incorrectly. Insert the

batteries correctly into the

battery compartment. Make

sure the + and - poles point in

the right direction.

4222.002.4835.3

2/5

Philips hq 804 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info