Bedienungsanleitung Philips hr 7772 00 (Seite 8 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

380760

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

3 When you use the blade unit, the kneading accessory or the

balloon beater, put the ingredients to be processed in the bowl.

Note: Do not ll the bowl beyond the MAX indication.

4 Putthelidonthebowl(1).Turnthelidclockwise(2)toxit

(‘click’) (Fig. 3).

Note: Make sure the projection on the lid locks into the slot of the bowl

handle

5 When you use one of the discs, add the ingredients through the

feeding tube and push them down with the pusher.

6 Select the speed setting that corresponds with the colour of the

accessory in the bowl. See the appropriate section below.

7 Whenyouhavenishedprocessing,turnthespeedselectorto

0 (Fig. 4).

Feeding tube and pusher

- Use the feeding tube to add liquid and/or solid ingredients. (Fig. 5)

- Use the outer pusher to push solid ingredients down the feeding

tube. (Fig. 6)

- If the ingredients you are going to shred or slice have a small

diameter, put the outer pusher in the feeding tube to make the

feeding tube smaller. Then use the inner pusher to push the

ingredients down the feeding tube. (Fig. 7)

Tip: You can also use the inner and outer pusher to close the feeding tube.

This prevents ingredients from escaping through the feeding tube.

Blade unit

You can use the blade unit to chop, mix, blend or puree ingredients.

1 Remove the protective cover from the blade (Fig. 8).

The cutting edges are very sharp. Do not touch them.

2 Put the tool holder in the bowl. (Fig. 9)

3 Put the blade unit on the tool holder in the bowl (Fig. 10).

ENGLISH8

4 Put the ingredients in the bowl. Pre-cut large pieces of food into

piecesofapprox.3x3x3cm(Fig.11).

Note: Always put the tool holder with the blade unit in the bowl before you

add the ingredients.

5 Putthelidonthebowl(1).Turnthelidclockwise(2)toxit

(‘click’) (Fig. 12).

6 Put the pusher in the feeding tube.

7 Select the speed that corresponds with the colour of the

accessory (Fig. 13).

8 Whenyouhavenishedprocessing,turnthespeedselectorto0

and unplug the appliance (Fig. 4).

Tips

- When you chop onions, press the pulse button a few times to

prevent the onions from becoming too nely chopped (Fig. 14).

- Do not let the appliance run too long when you chop (hard) cheese

or chocolate. Otherwise these ingredients become too hot, start to

melt and turn lumpy.

- Do not use the blade unit to chop very hard ingredients like coffee

beans, turmeric, nutmeg and ice cubes, as this may cause the blade to

get blunt.

- The standard processing time for all chopping jobs is 30-60 seconds.

- If food sticks to the blade or to the wall of the bowl, switch off the

appliance and unplug it. Then use a spatula to remove the food from

the blade or from the wall of the bowl.

Kneading accessory

You can use the kneading accessory to knead yeast dough for bread and

pizzas.

The standard processing time for all kneading jobs is 30-180 seconds.

1 Put the tool holder in the bowl (Fig. 9).

2 Put the kneading accessory on the tool holder. (Fig. 15)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips hr 7772 00 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info