Bedienungsanleitung Philips HR1619 (Seite 9 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

507605

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

5 Putthelidonthebowl(1).Turnthelidanticlockwise(2)toxit(‘click’)(Fig.7).

6 Fasten the motor unit onto the lid of the bowl (‘click’) (Fig. 8).

7 Put the pusher in the feeding tube.

Note: The pusher prevents spillage.

8 Press the on/off button or the turbo speed button to switch on the appliance.

- When you use the on/off button, you can adjust the speed with the speed selector. The higher

the speed, the shorter the processing time required.

- When you use the turbo speed button, the appliance operates at maximum speed. In this case,

you cannot adjust the speed with the speed selector.

Note: If the ingredients stick to the wall of the bowl, release the button to switch off the appliance and

loosen the ingredients with a spatula or add some liquid.

Note: Always let the appliance cool down after chopping meat with the blade unit.

9 After processing, release the on/off button or the turbo speed button to switch off the

appliance. Then wait until the blade unit has stopped rotating.

10 Press the lid release button on the bowl (1) and turn the lid clockwise to remove it

(2). (Fig. 9)

Tips

- The appliance chops very quickly. If you use the turbo speed button, use it briey to prevent the

food from becoming too nely chopped.

- Do not let the appliance operate too long when you chop (hard) cheese or

chocolate. Otherwise these ingredients become too hot, start to melt and turn lumpy.

- Do not use the blade unit to chop very hard ingredients like coffee beans, turmeric, nutmeg and

ice cubes, as this may cause the blade unit to get blunt.

Combination disc

The combination disc is intended for slicing and shredding vegetables like cucumber, carrots,

potatoes, leek and onions and certain kinds of cheese. One side is intended for slicing and the other

side for shredding. You can switch from slicing to shredding and the other way round by simply

turning the disc.

Never process hard ingredients like ice cubes with the combination disc.

The cutting edges of the combination disc are very sharp. Do not touch them.

1 Place the tool holder in the bowl (Fig. 5).

2 Place the combination disc on the tool holder with the slicing or shredding side facing up,

depending on the result you want (Fig. 10).

3 Putthelidonthebowl(1).Turnthelidanticlockwise(2)toxit(‘click’)(Fig.7).

4 Put the ingredients in the feeding tube.

- Pre-cut large ingredients into chunks that t in the feeding tube.

- Fill the feeding tube evenly for the best results.

- When you have to process a large amount of ingredients, process small batches and empty the

bowl between batches.

- To shred cheese, e.g. Parmesan, Gouda or Emmentaler, the cheese should be at refrigerator

temperature.

5 Fasten the motor unit onto the lid of the bowl (‘click’) (Fig. 8).

6 Press the on/off button or the turbo speed button to switch on the appliance.

ENGLISH 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips HR1619 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info