Register your pr
HR7629
www
Specifications are subject to change without notice
© 2014 K
All rights reserved.
10 11 12
P
0
1
2
5
6
4 min 1 kg 1
20 sec 500 g1
30 sec 500 g
1
30 sec 200 g
1
30 sec 2 pcs
1
30 sec 500 g
1
(HR7629)
(HR7629)
1 min1
1 min1
1 min1
P
P x 9
(HR7628, HR7629)
6 x
1
(MAX)
(MAX)
(MAX)
(MAX)
5 x 1 sec 500 gP
5 x 1 sec 500 g P/2
30 sec 50 gP
60 sec 250 g2
45 sec 250 g2
30 sec 200 g2
2-3 min 500 g
360 ml
350 ml
4 pcs
1
1
1
30 sec
500
g1
30 sec 500 g1
(HR7627, HR7628)
60-180 sec
60-180 sec
P
0
1
2
30 sec 300 g1
400 g
3 min
600 ml
2
30 sec 2 pcs 1
1/5
English
1 Important
Congratulations on your purchase and welcome to Philips!
that Philips offers,
Read this user manual carefully before y
future reference.
Danger
• Do not immer
it under the tap
W
• Never use y
ingredients into the feeding tube while the appliance
is r
• Before y
make sure that the v
of the appliance cor
voltage.
• Never connect this appliance to a timer switch,
a
• Do not use the appliance if the pow
plug,
par
• If the pow
replaced by Philips,
by Philips,
hazard.
• This appliance shall not be used by children.
the appliance and its cord out of reach of children.
• This appliance can be used by per
physical,
exper
super
appliance in a safe wa
hazards inv
• For their safety
the appliance
• Never let the appliance r
• If food sticks to the wall of the b
switch off the appliance and unplug it.
spatula to remo
• Be careful when y
or clean the discs,
sieve.
• Do not touch the blades,
appliance is plugged in.
• If the blades get stuck,
y
• Be careful if hot liquid is poured into the food
processor or blender as it can be ejected out of the
appliance due to a sudden steaming.
• This appliance is intended for household use onl
Caution
• Never switch off the appliance b
blender jar
the appliance by turning the speed selector to 0 or
OFF
• Unplug the appliance immediately after use.
• Alwa
then switch off and unplug the appliance before
opening the lid and reaching into any of the par
that mo
• Alwa
unattended,
cleaning and changing accessor
par
• Thoroughly clean the par
with food before y
time
given in this man
• Never use an
manufacturer
recommend.
y
• Do not exceed the maximum lev
the bowl or the jar
time and speed as indicated in the user manual.
• Let hot ingredients cool down (< 80ºC) bef
processing them.
• Alwa
temper
• Cer
discolor
does not ha
discolor
• Noise levLc = 85 dB [A]
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable standards and regulations regarding
exposure to electromagnetic elds (EMF).
instr
availab
Recycling
Y
components,
When you see the crossed-out wheel bin symbol attached to a product,
the product is cov
Never dispose of y
about the local r
The correct disposal of your old product helps prevent potentially negativ
consequences on the environment and human health.
2 Introduction
Congratulations on your purchase and welcome to Philips! To fully benet from the support
that Philips offers, register your product at www.philips.com/welcome.
This appliance is equipped with a built-in safety lock. You can only switch on the appliance
after you correctly assemble the following parts on the motor unit:
• the food processor bowl and its lid, or
• the blender jar and its lid (HR7628, HR7629 only), or
• the citrus press (HR7629 only)
If these parts are assembled correctly, the built-in safety lock is unlocked.
For recipes to use with your food processor, go to www.philips.com/kitchen
3 Food processor
W
• Never use your ngers or an object to push ingredients into the feeding tube while the appliance is
r
Blade unit
Before you start, make sure you assemble according to Fig. 2.
You can use the blade unit to chop, mix, blend, or puree ingredients. You can also use it to
mix and blend cake batters.
Caution
• Do not use the blade unit to chop hard ingredients,
cubes,
Note
• Do not let the appliance run too long when you chop (hard) cheese or chocolate
ingredients become too hot,
• Precut large pieces of food into pieces of approx.
1 Turn the the bowl clockwise to x it on the motor unit, and then put the tool holder in
the bowl.
When the bowl is xed correctly, you hear a click.
2 Put the blade unit on the tool holder.
3 Put the ingredients in the bowl.
4 Put the lid on the bowl, and then turn the lid clockwise to x it.
When the lid is assembled correctly, you hear a click and the lid is xed to the bowl
handle.
5 Put the pusher into the feeding tube.
6 Connect the power plug to the power supply.
7 Check the preparation time, the maximum amount and the speed setting required for
the ingredients in Table 1. Turn the knob to the desired speed setting.
8 After use, turn the knob to 0, and then unplug the appliance.
Tip
• When you chop onions,P a few times to prevent the onions from becoming too
nely chopped.
• How to remov
and then unplug it.
from the side of the bowl with a spatula.
Kneading accessory
Before you start, make sure you assemble according to Fig. 3.
You can
the amount of liquid to form the dough according to the humidity and temperature condition.
Note
• Do not use the kneading accessor
• Always put the kneading accessor
1 Turn the the bowl clockwise to x it on the motor unit, and then put the tool holder in
the bowl.
When the bowl is xed correctly, you hear a click.
2 Put the kneading accessory on the tool holder.
3 Put the ingredients in the bowl.
4 Put the lid on the bowl, and then turn the lid clockwise to x it.
When the lid is assembled correctly, you hear a click and the lid is xed to the bowl
handle.
5 Put the pusher into the feeding tube.
6 Connect the power plug to the power supply.
7 Turn the knob to the 1 position.
8 Check the preparation time, the maximum amount and the speed setting required for
the ingredients in Table 1.
9 After use, turn the knob to 0, and then unplug the appliance.
Discs and Inserts
Before you start, make sure you pick your desired disc from following and assemble
according to Fig. 4 and Fig. 5.
• Emulsifying disc
• Insert for ne (HR7627 and HR7628 only)
• Insert for granulating (HR7627 and HR7628 only)
• Reversible slicing / shredding disc (coarse) (HR7629 only)
Caution
• Be careful when you handle the slicing blade of disc.
• Never use the disc to process hard ingredients,
• Do not exer
Note
• Precut large ingredients into chunks that t in the feeding tube.
1 Turn the bowl clockwise to x it on the motor unit, and then put the tool holder in the
bowl.
When the bowl is xed correctly, you hear a click.
2 Put the disc on the shaft. For inserts (HR7627 and HR7628 only), place an insert in the
insert holder as indicated below, then place the insert holder with insert on the shaft.
Place the opening of the insert over the shaft of the insert holder.
Push the opening of the insert over the projection on the shaft.
Press the insert onto the insert holder until it locks in position with a click.
3 Put the lid on the bowl, and then turn the lid clockwise to x it.
When the lid is assembled correctly, you hear a click and the lid is xed to the bowl
handle.
4 Put the ingredients into the feeding tube with the pusher. Fill the feeding tube evenly for
the best results. When you have to process a large amount of ingredients, process small
batches and empty the bowl between batches.
5 Connect the power plug to the power supply.
6 Check the preparation time, the maximum amount and the speed setting required for
the ingredients in Table 1. Select the speed that matches the color of the accessory.
7 After use, turn the speed selector to 0, and then unplug the appliance.
Citrus press (HR7629 only)
Before you start, make sure you assemble according to Fig. 6.
You can use the citrus press to squeeze citrus fruits.
1 Turn the the bowl clockwise to x it on the motor unit, and then put the tool holder in
the bowl.
When the bowl is xed correctly, you can hear a click .
2 Put the sieve for citrus press on the tool holder in the bowl. Make sure that the
projection on the sieve is locked in the slot of the bowl handle.
When the sieve is xed correctly, you can hear a click .
3 Put the cone on the sieve.
4 Connect the power plug to the power supply.
5 Check the maximum amount required for the ingredients in Table 1. Turn the knob to
speed 1 .
The cone starts rotating.
6 Press the citrus fruit onto the cone.
7 Stop pressing from time to time to remove the pulp from the sieve. When you nish
pressing or when you want to remove the pulp, turn the knob to 0 and remove the bowl
from the appliance with the sieve and cone on it.
Blender (HR7628 and HR7629 only)
Before you start, make sure you assemble according to Fig. 7.
The blender is intended for:
• Blending uids, like dairy products, sauces, fruit juices, soups, mixed drinks, and shakes.
• Mixing soft ingredients, like pancake batter.
• Pureeing cooked ingredients, like baby food.
• Crushing ice.
3140 035 30412
NL Gebruiksaanwijzing
NO Bruk
PT Manual do utilizador
SV Användarhandbok
TR K
EN User manual
DA Bruger
DE Benutzerhandbuch
EL Εγχειρίδιο χρήσης
ES Manual del usuario
FI Käyttöopas
FR Mode d’emploi
IT Manuale utente
AR
FA
