Bedienungsanleitung Philips HTS3510 (Seite 18 von 22) (Englisch)

598009

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Sound

No sound.

• Ensure that the audio cables are connected

and select the correct input source (for

example, AUDIO SOURCE) for the device

you want to play.

No sound on HDMI connection.

• You might not hear any sound if the

connected device is not HDCP (High-

bandwidth Digital Content Protection)

compliant or only DVI compatible. Use an

analog or digital audio connection.

• Ensure that the [HDMI Audio] is enabled.

No sound from TV program.

• Connect an audio cable from the audio

input on the home theater to the audio

output on the TV, then press AUDIO

SOURCE repeatedly to select the correct

audio source.

Distorted sound or echo.

• Ensure that the TV volume is muted or set

to minimum if you are playing audio through

the home theater.

Audio and video are not synchronized.

• 1) Press and hold AUDIO SYNC. 2) Press

+/- within ve seconds.

Play

Disc cannot be played.

• Clean the disc.

• Ensure that the home theater supports the

disc (see ‘Product specications’ on page

16).

• Ensure that the home theater supports the

region code of the DVD.

• For DVD±RW or DVD±R, ensure that the

disc is nalized.

DivX video les cannot be played.

• Ensure that the DivX le is encoded

according to the ‘Home Theater Prole’

with the DivX encoder.

• Ensure that the DivX video le is complete.

DivX subtitles do not display correctly.

• Ensure that the subtitle le name is the

same as the movie le name.

• Select the correct character set: 1) Press

SETUP. 2) Select [Preference Setup].

3) Select [DivX Subtitle]. 4) Select a

supported character set. 5) Press OK.

9 Troubleshooting

Warning

•

Risk of electric shock. Never remove the

casing of the product.

To keep the warranty valid, never try to repair the

product yourself.

If you have problems using this product, check the

following points before you request service. If you

still have a problem, register your product and get

support at www.philips.com/welcome.

If you contact Philips, you will be asked for the

model and serial number of your product. The

model number and serial number are on the back

or bottom of your product. Write the numbers

here:

Model No. __________________________

Serial No. ___________________________

Main unit

The buttons on this home theater do not work.

• Disconnect the home theater from the

power outlet for a few minutes, then

reconnect.

Picture

No picture.

• Ensure that the TV is switched to the

correct source for this home theater.

• If this happens when you change the TV

system, switch to its default mode: 1) Press

to open the disc compartment. 2) Press

the Numeric buttons’3’.

• If this happens when you switch on the

progressive scan mode, switch to its

default mode: 1) Press

to open the

disc compartment. 2) Press the Numeric

buttons’1’.

No picture on HDMI connection.

• Check if the HDMI cable is faulty. Replace

with a new HDMI cable.

• If this happens when you change the HDMI

video resolution, switch to its default mode:

1) Press

to open the disc compartment.

2) Press the Numeric buttons ‘1’.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips HTS3510 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips HTS3510

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info