Bedienungsanleitung Philips HTS5220 (Seite 28 von 34) (Englisch)

472869

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Sound

No sound.

• Ensure that the audio cables are connected

and select the correct input source (for

example,

SOURCE / AUDIO SOURCE )

for the device you want to play.

No sound on HDMI connection.

• You might not hear any sound if the

connected device is not HDCP (High-

bandwidth Digital Content Protection)

compliant or only DVI compatible. Use an

analog or digital audio connection.

• Ensure that the [HDMI Audio] is enabled .

No sound from TV program.

• Connect an audio cable from the audio

input on the home theater to the audio

output on the TV, then press

SOURCE /

AUDIO SOURCE repeatedly to select the

correct audio source.

Distorted sound or echo.

• Ensure that the TV volume is muted or set

to minimum if you are playing audio through

the home theater.

Audio and video are not synchronized.

• 1) Press

SOUND SETTINGS / ( Sound

options ) . 2) Press the Navigation buttons

(left/right) repeatedly until AUDIO SYNC

is displayed, then press OK . 3) Press the

Navigation buttons (up/down) to sync the

audio with the video.

Play

Disc cannot be played.

• Clean the disc.

• Ensure that the home theater supports the

disc (see ‘Product speciÀ cations’ on page

24 ) .

• Ensure that the home theater supports the

region code of the disc.

• For DVD±RW or DVD±R, ensure that the

disc is À nalized.

DivX video ﬁ les cannot be played.

• Ensure that the DivX À le is encoded

according to the ‘Home Theater ProÀ le’

with the DivX encoder.

• Ensure that the DivX video À le is complete.

9 Troubleshooting

Warning

• Risk of electric shock. Never remove the

casing of the product.

To keep the warranty valid, never try to repair the

product yourself.

If you have problems using this product, check the

following points before you request service. If you

still have a problem, register your product and get

support at www.philips.com/welcome.

If you contact Philips, you will be asked for the

model and serial number of your product. The

model number and serial number are on the back

or bottom of your product. Write the numbers

here:

Model No. __________________________

Serial No. ___________________________

Main unit

The buttons on this home theater do not work.

• Disconnect the home theater from the

power outlet for a few minutes, then

reconnect.

Picture

No picture.

• Ensure that the TV is switched to the

correct source for the home theater.

No picture on HDMI connection.

• Change the HDMI video setting or wait for

15 seconds for auto recover.

• Check if the HDMI cable is faulty. Replace

with a new HDMI cable.

No picture on the Component (Y Pb Pr)

connection.

• If the HDMI video connection is set to

[Auto] or [1080p/24Hz] , there is no video

output through the component connection.

Change the HDMI video setting or remove

the HDMI connection.

No high-deﬁ nition video signal on the TV.

• Ensure that the disc contains high-deÀ nition

video.

• Ensure that the TV supports high-deÀ nition

video.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips HTS5220 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips HTS5220

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info