Bedienungsanleitung Philips HTS8562 (Seite 33 von 52) (Englisch)

531259

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

English

Control devices

Control the home theater and the other

connectedHDMI-CECcompliantdeviceswitha

single remote control.

One-touch play

IfyouenableOne-touchplay,theTV

automatically switches to the correct channel

when you play a disc in your home theater.

One-touch standby

When you press and hold

(Standby) on the

remote control, the home theater and all the

connectedHDMI-CECdevices(thatsupport

one-touchstandby)switchtothestandby

mode.

Ifone-touchstandbyisenabledonyourhome

theater, you can switch to standby with the

remotecontroloftheTVorotherHDMI-CEC

devices.

System Audio Control

When you play a device that has its audio

output routed to the home theater, the home

theater switches to the corresponding audio

source automatically.

Touseone-touchaudio,turnonSystemAudio

Control and follow the instructions on the TV

to map connected devices to the audio input

connectors of the home theater.

Audio Input Mapping

When you connect a new device to your home

theater, map the device to the audio input

connector(see‘Playaudiofromhometheater’

on page 33).

Play audio from home theater

Play the audio from a connected device through

your home theater.

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [EasyLink] > [System Audio

Control] > [On], and then press OK.

• To play the audio from the TV

speakers, select [Off], and skip the

following steps.

4 Select [EasyLink] > [Audio Input Mapping],

and then press OK.

5 Follow the instructions on the TV to map

the audio of the connected device to the

audio inputs on your home theater.

• When you have downloaded a video

to your card, you can watch it only on

yourhometheater.Youcan’tmovethe

card and watch it on another device.

• If you move the card and format it

in another device, your downloaded

video is erased. Download your video

again before you watch.

7 Press the play buttons on your remote

control to play, pause, search, or stop the

video.

Multiview

You can watch two video sources side by side on

some of the Philips TVs. The sources can be:

• video from your home theater,

• TV broadcasts, and

• Net TV.

For information about how to set up multiview,

see your TV user manual.

EasyLink

The home theater supports Philips EasyLink, which

usestheHDMI-CEC(ConsumerElectronics

Control)protocol.EasyLink-compliantdevicesthat

are connected through HDMI can be controlled

by a single remote control.

Philips does not guarantee 100% interoperability

withallHDMI-CECdevices.

What you need

• HDMI-CECcompliantdevices.

• An HDMI connection between the

connected devices.

Switch on

1 On the TV and other connected devices,

turnontheHDMI-CECoperations.For

details, see the manual of the TV or other

devices.

2 Press (Home).

3 Select [Setup], and then press OK.

4 Select [EasyLink] > [EasyLink], and then

press OK.

5 Select [On], and then press OK.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips HTS8562 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips HTS8562

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info