Bedienungsanleitung Philips ipf176 (Seite 17 von 44) (Englisch)

53702

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Die Faxweiche

The intelligent fax switch enables you to phone and fax

from the same telephone connection and use additional

devices. The fax switch separates fax and voice messages.

For example, it can receive fax messages silently, i.e.

without ringing to avoid causing a disturbance.

The operating modes S and M for day and night

operation allow you to decide on different modes during

the day and at night, how often the machine should ring

prior to receipt of faxes or before the answering machine is

turned on.

Example:

During daytime it is assumed that calls should ring. After a

set time the fax reception is turned on or messages can be

left on the (internal or external) answering machine. At

night it is assumed that disturbances are minimised. Faxes

are then received silently and calls ring more quietly.

You may change-over the operating mode between S and

M of your fax machine automatically using the timer

function U. The integral clock ensures that your machine

is changed over at 10 pm to M and at 6 am to S. Of

course you may adjust these times to suit your own

requirements. The display allows you to check the current

operating status. You change-over between S and M by

briefly pressing the key S until the display shows the

required symbol.

Setting the mode

SMSM

with built-in answering device

Display Possible settings

0, 1, 2, 3, 4, 5, 6,

7, 5/2

FAX RINGS:

0, 1, 2, 3, 4, 5,

MANUAL RECEPTION

Low, Medium,

High

ON, OFF

1 Select function 31 (Day) by pressing MENU and numbers

3 and 1. Confirm with OK.

2 Select number of rings with </> before your answering

device will be activated.

TAM RINGS: 5/2

3 Confirm your entry with OK.

4 Now enter the number of ringing signals, after which the

automatic fax-switch should accept the call and separate

faxes from voice messages. Although the caller will continue

to hear slightly different ringing tones after this time,

charges will already accrue.

FAX RINGS: 5

5 Confirm your entry with OK.

6 Using </>, determine the ringer volume when receiving a

call. Press OK.

RINGER VOL.:HIGH

7 Select with </> if the caller should be heard while leaving

a message.

LISTEN-IN: ON

8 Confirm with OK.

9 To activate mode M select MENU 32 (Night) and

repeat steps 2 to 8.

without built-in answering machine

Display Possible settings

TOTAL RINGS:

0, 1, 2, 3, 4, 5,

6, 7

FAX RINGS:

0, 1, 2, 3, 4, 5,

MANUAL RECEPTION

RINGER VOL.:

Low, Medium,

High

1 Select function 31 (Day) by pressing MENU and numbers

3 and 1. Confirm with OK.

2 Using </>, set the total number of rings before the fax

reception commences.

TOTAL RINGS: 5

3 Confirm your entry with OK.

4 Now enter the number of ringing signals after which the

fax-switch should accept the call and separate faxes from

voice messages. Although the caller will continue to hear

slightly different ringing tones after this time, charges will

already accrue.

FAX RINGS: 5

5 Confirm your entry with OK.

6 Using </>, determine the ringer volume when receiving a

call. Press OK.

RINGER VOL.:HIGH

7 Confirm with OK.

8 To activate mode M select MENU 32 (Night) and repeat

steps 2 to 7.

4 Fax switch

TAM RINGS:

LISTEN-IN:

RINGER VOL.:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips ipf176 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info