Bedienungsanleitung Philips Laserfax 825 (Seite 11 von 48) (Englisch)

44377

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

1. Installation

Chapter 1. Installation

10 Wait until insert card appears on the display.

Push the Plug’n’Print card of the new toner cartridge

into the opening on the left side next to the paper

tray, with the contacts facing to the left. (Only the

starter cartridge can be used without inserting a

Plug’n’Print card.)

Should the error message Cannot read

card

appear on the display, you may have

inserted the Plug’n’Print card incorrectly.  e con-

tacts must face to the left as you insert the card

into the machine.

11 It may take a moment to update the cartridge. When

the process is completed, the following appears on

the display:

action completed / remove card

12 Pull the Plug’n’Print card out of the fax machine.

You can interrupt the recharging process at any time by

simply pressing STOP. However, the toner level memo-

ry must be updated for each new toner cartridge. If you

have pressed the STOP key by mistake, you can restart

the recharging process as follows:

1 Press MENU/OK,

and OK

2 Select new black with

, and conﬁ rm with

OK. Select yes with

. After a short time, the fax

machine will ask you to insert the Plug’n’Print card.

If the toner level of your cartridge is low, then every time

you open and close the cover, the following question will

appear on the display:

black=new? If you have not

installed a new cartridge, press STOP. If you have in-

stalled a new cartridge, press OK and follow the descrip-

tion set forth above.

Displaying the Toner Level

Whenever you insert a new toner cartridge,

you must update the toner level memory of

your fax machine with the Plug’n’Print card that is

included with the new cartridge. Your fax machine

registers the extent of toner usage for every print-

out and calculates the toner level of the cartridge

based on this.  e indicated toner level is only

meaningful if you update each new toner cartridge

with the Plug’n’Print card provided.

1 Press MENU/OK,

and OK.

2 Select cart capacity with

and conﬁ rm

with OK.  e toner level of the toner cartridge is

indicated by a percentile value between 100 percent

(full) and 0 percent (empty).

3 Pressing C will return you to the previous menu step;

pressing STOP will return you to the root menu.

Paper

Before your fax machine will be ready to make copies

or receive faxes, you must load paper into the machine.

Use the following paper sizes: A4, 210 × 297 millimetres,

letter, 216 × 279 millimetres (8.5 × 11 inches), or legal,

216 × 356 millimetres (8.5 × 14 inches). Your fax machine

works with normal copier paper and with typewriter pa-

per (60 to 90 g/m

). Please use only 90 g/m

stock for

legal-sized paper. You can use paper of all three sizes as

input documents and as output paper.

Loading Paper Size A4

1 Pull out the paper tray.

2 Separate the paper sheets by fanning them out,

then align them by tapping edge of the stack lightly

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips Laserfax 825 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips Laserfax 825

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info