Bedienungsanleitung Philips Laserfax 925 (Seite 9 von 40) (Englisch)

44399

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

General Safety Information 9

General Safety Information

Your device has been tested in conformity with standards

EN 60950-1 and IEC 60950-1 and should only be operated

with telephone systems and power equipment that meet

these standards. The device was built exclusively for use in

the indicated sales region.

Do not make any changes or settings that are not described

in this user manual.

Setting Up the Machine

The device should rest securely on a stabile, flat surface.

The device should rest securely on a stabile, flat surface. If

the device should fall, it can be damaged or can cause injury

to people, especially small children. Position all cables in

such a way that no one will stumble on them, thus avoiding

possible injuries to persons or damage to the device itself.

The distanc e between the device a nd other appliances o r objects, must be at le ast 15 centimetres.

The distance between the device and other devices or objects

must be at least 15 centimetres; this also applies to the use

of additional cordless telephones. Do not place the device in

the vicinity of radios or televisions.

Lock the cove r of the device completely into pl ace

Lock the cover of the device completely into place when

opening the device. You could be injured if the cover falls

while you are working on the device.

Protect the dev ice against direct sunlight

Protect the device against direct sunlight, heat, large temper-

ature fluctuations and moisture. Do not place the device in

the vicinity of heaters or air conditioners. Observe the infor-

mation on temperature and humidity in the technical data.

The device must have sufficient ventilation

The device must have sufficient ventilation and may not be

covered. Do not put your device in closed cabinets or boxes.

Do not place the machine on soft surfaces such as table-

cloths or carpets and do not cover the ventilation slits. Oth-

erwise, the device can overheat and catch on fire.

The area in which you operate the device must be adequately ventilated

The area in which you operate the device must be adequate-

ly ventilated, especially if the device is used frequently. Set

up your device in such a way that the flow of the exhaust air

stream points away from the work station.

In the event that t he device becomes too hot, or if y ou see smoke coming from the devic e

In the event that the device becomes too hot, or if you see

smoke coming from the device, you must immediately pull

the power cable out of the power socket. Have your device

examined by trained professionals at a technical service loca-

tion. To prevent the spread of fire, open flames should be

kept away from the device.

Do not plug in the device in moist rooms.

Do not plug in the device in moist rooms. Never touch the

mains cable, the mains connection or the telephone socket

with wet hands.

Do not allow liquids to enter into the device.

Do not allow liquids to enter into the device. Disconnect

the device from the power socket if liquids or foreign objects

have entered the device and have your device examined by

trained professionals at a technical service location.

Do not allow c hildren to handle the device withou t supervision.

Do not allow children to handle the device without supervi-

sion. The packing materials should be kept out of the hands

of children.

Magnetic telephone handset

The telephone handset of the device is magnetic. Caution,

small metallic objects (paper clips) may be retained if placed

near or on the telephone handset.

Power Supply

Check whether the mains voltage of your device

Check whether the mains voltage of your device (indicated

on the type label) matches the mains voltage available at the

setup location.

Use only the power and telephones cables supplied.

The device does not have an on/off button.

Set up your device so that the power socket is easily accessi-

ble. The device does not have an on/off button. In an emer-

gency, disconnect your device from the power supply by

pulling the power plug.

Never touch the power or telephone cable if the insulation is damaged.

Never touch the power or telephone cable if the insulation

is damaged.

Disconnect your devic e from the power and telephone networks during an electrical storm.

Disconnect your device from the power and telephone net-

works during an electrical storm. If this is not possible, do

not use the device during an electrical storm.

Before cleaning the surface of your device, disconnect it from the power and telephone networks.

Before cleaning the surface of your device, disconnect it

from the power and telephone networks. Never use liquid,

gaseous or easily flammable cleansers (sprays, abrasives, pol-

ishes, alcohol).

Only clean the di splay with a dry, soft cloth.

Only clean the display with a dry, soft cloth. If the display

breaks, a mildly corrosive liquid may escape. Avoid all con-

tact with your skin and eyes.

In the event of a power failure, your device will no t function;

In the event of a power failure, your device will not func-

tion; saved data is retained.

Repairs

Should disruptions occur, follow the instructions on the dis-

play and on the error report.

Do not make any repairs to the device yourself. Improper

maintenance can result in injuries or damage to the device.

Only have your device repaired by an authorised service cen-

tre.

Do not remove the type label from your device; this would

void the warranty.

Consumable Materials

Use only original consumable materials. These are available

from a specialised retailer or through our order service (see

back side of this user manual). Other consumable materials

could damage the device or shorten its service life.

Dispose of old consumable materials according to the waste

regulations of your country.

Never open a toner cartridge. If toner dust is released into

the air, you should avoid allowing it to contact your skin

and eyes. Store both new and used cartridges in a place

where they will not come into the hands of children.

In case of a paper jam, do not forcefully remove the paper,

but rather pull it gently out of the device and throw it away

carefully: It is possible that the toner may not be completely

set on the print-out, and toner dust could be released into

the air. Do not inhale the released toner dust. Remove the

toner dust from clothing or objects with cold water; hot wa-

ter would only cause the toner to set.

Laser-Safety

Your device operates with laser beams. Only a qualified serv-

ice technician should open the device and carry out service

operations; otherwise there is a risk of eye injuries resulting

from both visible and invisible laser radiation.

Class 1 La ser Product

Class 1 Laser Product

Philips Laserfax 925 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips Laserfax 925

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info