Bedienungsanleitung Philips Laserfax 935 (Seite 15 von 40) (Englisch)

44401

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Fax 15

Memory

The fax memory can store up to 100 pages (LPF¦920,

LPF¦925, LPF¦935) or 400 pages (LPF¦940). Follow the

specifications in the technical data.

Memory

Receiving Fax Manually

Select manual reception under fax reception mode (see

Chapter Setting the Fax Reception Mode, page 28). The

device will not receive faxes on its own. This setting is use-

ful, when you want to receive faxes via a modem connected

to a computer. You can start fax reception manually, by

pressing o.

Deactivating Automatic Fax

Printout

Deactivating Automatic Fax Printout

You can secure your fax reception with a code. In that case,

incoming faxes are not printed out, but rather are stored in

the fax memory. Only after entering a PIN code can you

print out these fax transmissions.

Entering the PIN Code

1 Press OK, 27 and OK.

2 Using [ select

ANSWER CODE.

3 Confirm with OK.

4 Enter a four-digit PIN code.

5 Confirm with OK.

Switching On and Off

1 Press OK, 27 and OK.

2 Using [ select

ACTIVATION.

3 Confirm with OK.

4 Enter the four-digit PIN code.

5 Confirm with OK.

6 Use [ to select whether you would like to turn the

function on or off.

7 Confirm with OK.

Printing Out Fax Transmissions

1 Press OK, 27 and OK.

2 Using [ select

PRINT.

3 Confirm with OK.

4 Enter the four-digit PIN code.

5 Confirm with OK. The stored fax transmissions are

printed out and deleted from the memory.

Polling Faxes

Fax Polling

With the fax polling function, you can retrieve faxes that

lie ready in the dialled fax machine. You can also provide

documents on your machine to be polled by others.

Polling Faxes Directly

1 Press OK, 22 and OK.

2 Enter the desired number using the numeric keypad or

select a saved entry.

3 Press o.

Time-Deferred Polling

1 Press OK, 22 and OK.

2 Enter the desired number using the numeric keypad or

select a saved entry.

3 Confirm with OK.

4 Enter the time, at which the document should be

polled, e.g. 14 00 for 2 pm.

5 Confirm with OK.

6 The device is now in standby mode. You can continue

to carry on telephone conversations or send other fax

transmissions during this time.

Jobs

Polling Send of Faxes

1 Insert the document.

2 Press OK, 23 and OK.

3 Using [ select

SIMPLE or MULTIPLE. With the

setting

SIMPLE, the document can be polled only

once. If you select

MULTIPLE, the document can be

freely polled any number of times.

4 Confirm with OK.

5 Using [, select the desired contrast.

6 Confirm with OK. After a short warm up phase, the

device will store the document in the fax memory.

Jobs

If the message memory is full, no additional messages

can be received.

If you have already saved a code, the device will

ask you to provide the old code first before you

can enter a new code.

Note down your PIN code in a safe place. Should

you forget the PIN code, the device must be reset

to factory settings, in order to be able to access it

again. All personal settings will be deleted.

To cancel a scheduled fax transmission, simply delete

the document from the jobs list (also see chapter

Jobs, page 16).

To cancel a scheduled fax transmission, simply delete

the document from the jobs list (also see chapter

Jobs, page 16).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips Laserfax 935 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips Laserfax 935

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info