Bedienungsanleitung Philips Lasfax 920 (Seite 34 von 40) (Englisch)

44397

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

34 Philips LPF 920 · 925 · 935 · 940

10 Glossary

Additional Devices

You can connect additional devices to your device, such as

answering machines, telephones, charge meters and com-

puter modems; these can be connected either in series or in

parallel. Parallel connection means that the devices are

connected to another telephone socket of the same line. If

you connect the devices to the external socket of your de-

vice, they are connected in series. The fax switch of your

device can control and regulate only devices connected in

series.

Broadcasting

see Sending to Multiple Recipients

Call-by-Call

Selection of the telephone service provider for each tele-

phone call. It is possible to place telephone calls through

different private service providers. By placing prefixes in

front of the actual telephone number, one can choose a dif-

ferent service provider for each telephone call without en-

tering into a firm contract relationship.

Caller List

The numbers of the last callers are stored in the caller list.

This function requires that the caller identification func-

tion be enabled for your PTT line and that the caller not

suppress the transmission of his or her telephone number

(see Calling Line Identification).

Calling Line Identification (CLIP)

There are two types of Calling Line Identification Presen-

tation (CLIP). If someone calls you, your device will show

the caller’s telephone number on the display. If another

caller places a call to you while you are having a telephone

conversation, you will hear a tone. Your telephone compa-

ny must offer both services and must enable them for your

PTT line. The transmission of your telephone number can

be turned on and off temporarily or it can be turned off

permanently (Calling Line Identification Restriction,

CLIR).

CCITT

Comite Consultatif International Téléphonique et Télé-

graphique (predecessor of ITU)

Conformité Européenne

Chain Dialling

see Combining Numbers

Chain Dialling

Before the dialling process begins, you can freely combine

and edit telephone book entries, manually entered digits,

numbers from the redial list or numbers from the caller list.

For example, if you have saved the telephone number pre-

fix of an inexpensive telephone service-provider (see Call-

by-Call) as a telephone book entry, select this entry and

manually enter the desired telephone number or select an-

other number from the telephone book, the redial list or

the caller list.

CLIP

Calling Line Identification Presentation (see Calling Line

Identification)

CLIR

Calling Line Identification Restriction (see Calling Line

Identification)

CNG

Calling Signal (see Fax Signal)

Dialling Pause

Long-distance numbers or telephone numbers with sub-

addresses/extensions sometimes require the insertion of a

dialling pause to prevent the dialling from occurring too

quickly and resulting in a loss of the connection. The sec-

ond part of the number is dialled only after a short pause.

Direct-Dial Number

Number used to directly dial a specific extension of a pri-

vate branch exchange.

DTMF

Dual Tone Multi Frequency (see Tone Dialling)

Dual Tone Multi-Frequency (DTMF)

see Tone Dialling

Easylink

The Easylink function offers you additional options for

managing external devices that are connected to the same

telephone line as your device (starting fax reception, taking

over the line, see Additional Devices). To use this function,

additional telephones must be set to tone dialling (DTMF

tones).

ECM

Error Correction Mode

Encoding

The data of your fax transmission are encoded and com-

pressed for the transmission. The minimum standard is

MH (Modified Huffmann). Better encoding methods are

MR (Modified Read) or MMR (Modified Modified

Read).

Energy Saving Mode

The device is normally in the energy save mode. Whenever

you receive a fax or if you would like to print or make a

copy, your device will automatically switch back into oper-

ating mode (see Warm-Up Phase).

Error Correction Mode (ECM)

The ECM method reduces transmission errors that result,

for example, from bad telephone lines, thereby reducing

the duration of transmissions. Both of the connected fax

machines must support ECM.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips Lasfax 920 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info