Bedienungsanleitung Philips LPF 935 (Seite 36 von 40) (Englisch)

508176

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

36 Philips LPF 920 · 925 · 935 · 940

Pulse dialling

A dialling process that is used in older telephone networks.

You hear a clicking for each number dialled (see Tone Di-

alling).

RAM

Random Access Memory

Resolution

Number of dots per inch (dpi). For sending and receiving

faxes, the resolution options available are Normal, Fine,

SFine and Photo. For copying, the available resolutions are

Fast, Quality and Photo. The higher the resolution, the

longer it takes to complete the transmission.

RJ-11

Registered Jack 11 (also called Western plug, standardised

telephone plug)

Scanning

The reading of a document into the fax memory or into

the computer in order to send it, copy it or edit it.

Sender Identification (= Header)

The telephone number and name of the sender as well as

the date and time of the fax transmission appear in the up-

per margin of each received fax.

Sending to Multiple Recipients (= Broadcast-

ing)

With this function, you can send a fax or an SMS message

to multiple recipients.

Serial Connection

see Additional Devices

SMS

Short Message Service

soft modem

The device does not contain a fixed, built-in modem. A

program executes the modem function on demand and ac-

cesses the device memory (RAM). The features and func-

tions of the soft modem can be modified by altering the

software (see Hard Modem, see Modem).

Tone Dialling (= Dual Tone Multi-Frequency)

In many countries, tone dialling has replaced pulse dial-

ling, in which each number was sent as a corresponding

number of pulses. With tone dialling, a specific tone is as-

signed to each key (referred to as DTMF tones).

Toner Level Memory

Update the toner level memory of your device with the

Plug’n’Print card that is included with each new toner car-

tridge. Your device registers the extent of toner used for

every print-out and calculates the toner level of the toner

cartridge on that basis. The indicated toner level is only

meaningful if you update each new toner cartridge with

the Plug’n’Print card that is provided with the cartridge.

Transfer Speed

CCITT/ITU has published international standards for the

transmission of data over telephone lines. All short names

begin with V, so these are also referred to as V standards.

The most important transmission speeds for fax transmis-

sions are: V.17—7.200 to 14.400 bps, V.21—max. 300

bps, V.22—max. 1.200 bps, V.22 bis—max. 2.400 bps,

V.27 ter—max. 4.800 bps, V.29—max. 9.600 bps, V.32

bis—max. 14.400 bps, V.34—max. 33.600 bps

TWAIN

(Tool Without an Interesting Name) With the TWAIN

scanner driver you can access the device and scan docu-

ments from any application which supports this standard.

USB

Universal Serial Bus (computer port)

Warm-Up Phase

Normally, the device is in the energy saving mode (see En-

ergy Saving Mode). In the warm-up phase, the device heats

up the printing unit until it has reached the necessary op-

erating temperature, after which the copy or fax can be

printed out.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips LPF 935 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info