Bedienungsanleitung Philips LPF 940 (Seite 10 von 40) (Englisch)

508177

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

10 Philips LPF 920 · 925 · 935 · 940

5Only after completely pull off the protection strip lo-

cated on the left side of the cartridge.

6 Place the toner cartridge into your device. The cartridge

should snap securely into position.

7 Close the cover. Make sure that the cover snaps securely

into position on both sides.

Connecting the Telephone Cable

Connecting the Te lephone Cable

Connect the telephone cable to the device by inserting it in

the socket designated with LINE (RJ-11-Connector). In-

sert the telephone plug into your PTT line socket.

Telefonkabel anschließen

PABX Systems 1

Connecting the Mains Cable

Mains Voltage a t Setup Location

Connecting the Mai ns Cable

Insert the mains cable into the connection located on the

rear side of the device. Connect the mains cable to the elec-

trical socket.

Netzkabel anschließen

Initial Installation

Initial I nstallation

After you connect your device to the mains, the initial in-

stallation commences.

Selecting the Country

Setting the Cou ntry Correctly

1 Press OK.

2 Use [ to select the country in which you are operat-

ing the device.

3 Confirm twice with OK.

Entering Number

Header

Your name and number are added together with date, time

and page number at the top edge of each fax transmission

(= header).

1 Enter your number.

2 Confirm with OK.

Entering Name

1 Enter the name using the keys (A—Z).

2 Confirm with OK.

Entering the Date and Time

1 Enter the date (two digits for each field), for example

31¦05¦25 for May 31th, 2025.

2 Enter the time, e.g. 14 00 for 2 pm.

3 Confirm with OK.

Once you have removed the protection strip, do

not shake the toner cartridge any more. Other-

wise, it is possible that toner dust will be released

into the air.

Your device is an analogue fax device (Group 3). It is

not an ISDN device (Group 4), and therefore it can-

not be operated directly on an ISDN connection. In

order to do this, you need either an analogue adapter

or a connection for analogue terminals.

If you connect your device as extension to a tele-

phone system, you must set it for working as an ex-

tension (also see Chapter "Telephone connections

and additional devices, page 29).

Check whether the mains voltage of your device (in-

dicated on the type label) matches the mains voltage

available at the setup location.

Always set the country in which you are operating

the machine. Otherwise, your machine is not adapt-

ed to the telephone network. If your country is not

included in the list, you must select a different setting

and use the correct telephone cable for the country.

Consult your retailer.

To insert special characters and symbols, press

;ü. Select with [. Confirm with OK.

You can move the cursor using [. Use C to de-

lete individual characters.

Enter capital letters by pressing and holding ú

button. You can enter special characters using ½.

To insert special characters and symbols, press

;ü. Press ûü to insert language specific special

characters. Select with [. Confirm with OK.

You can move the cursor using [. Use C to de-

lete individual characters.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips LPF 940 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info