Bedienungsanleitung Philips M2505 (Seite 10 von 14) (Englisch)

750622

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

EN 9

2. Press and hold [SCAN/OK]for more than 2

seconds.

- The product scans and stores all DAB+ radio

stations automatically.

Select a DAB+ radio station

After DAB+ radio stations are scanned and stored,

press / to select a DAB+ station.

Store DAB+ radio stations manually

1. Press DAB/FM to select a DAB+ radio station.

2. Press [PRESET] to activate program mode.

3. Press / to allocate a number from 1–20 to

this radio station, and then press [PRESET] to

4. Repeat steps 1-3 to program more stations.

To select a preset DAB+ radio station: In DAB+

mode, press / .

DAB+ menu Selection and Information Display

1. In DAB+ mode, press MENU / INFO to access

DAB+ menu.

2. Press / to toggle the menu options.

[SCAN]: Scan and store all available DAB+ radio

stations.

[MANUAL]: Tune to a DAB+ station manually.

[PRUNE]: Remove invalid stations from the station

list.

[SYSTEM]: Adjust system settings.

3 .To select an option, press SCAN / OK

4. If a sub-option is available, repeat steps 2-3.

• To exit the menu, press MENU / INFO again.

Under [SYSTEM] (system) menu

• [RESET] (reset): reset all settings to factory default.

• [SW VER] (software version): show the software

version of this product.

Display DAB+ information

While listening to DAB+ radio, press MENU / INFO

repeatedly to display various information (if

available), such as frequency, signal strength,

time, etc.

Listen to FM radio

Tune to an FM radio station

1. Press DAB/FM to select a FM radio station

2. Press and hold / or more than 2 seconds.

- The radio tunes to a station with strong reception

automatically.

3. Repeat step 2 to tune to more stations.

To tune to a weak station: Press / repeatedly until

Store FM radio stations Automatically

Note

• You can store a maximum of 20 FM radio stations.

1. Press DAB/FM repeatedly to select FM source.

2. Press and hold SCAN/OK for more than 2 seconds.

- All available stations are programmed in the order of

waveband reception strength.

automatically.

Store FM radio stations manually

1. Tune to an FM radio station.

2.Press SCAN/OK to activate program mode.

- [P01] is displayed.

3. Press / to allocate a number from 1–20 to this

radio station, and then press SCAN/OK

4. Repeat steps 1-3 to program more stations.

Note

• To overwrite a programmed station, store another station

in its place.

Select a preset FM radio station

In FM mode, press / to select a preset number.

• While listening to FM radio, you may press SCAN/OK to

toggle stereo and mono sound.

Display RDS information

RDS (Radio Data System) is a service that allows FM

stations to show additional information.

1. Tune to an FM radio station.

2. Press MENU/INFO repeatedly to display various RDS

information (if available), such as station name, program

type, time, etc.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips M2505 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips M2505

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info