Bedienungsanleitung Philips Magic (Seite 13 von 36) (Englisch)

521762

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Connecting to ISDN

Your fax machine is not an ISDN fax (group 4), but an analogue fax

machine (group 3). Therefore it cannot be used directly on an ISDN

connection. You will need an (analogue) adapter or an ISDN connection

for analogue devices. For further information please refer to your ISDN

instructions.

Connecting to a private branch exchange

(PABX)

Private branch exchange systems are very common in large

companies. ISDN connections are private branch exchanges and

are used very often in private households. To get a connection

from a private branch exchange to the public network you have

to dial a key to obtain the outside line.

Please note: An additional telephone which is connected to a normal

telephone line together with your fax machine must not be mixed

up with a private branch exchange.

If you wish to use your fax machine on a PABX you have to change some

settings in function 15.

Tone or pulse dialling /

private branch exchange

In function 15 you can select either tone and pulse dialling and

then if there is a connection to a private branch exchange.

Your phone can dial in two different ways. Older telephone systems

usually work with pulse dialling whilst modern, digital systems use

tone dialling, which is faster. You can change the dialling mode of your

fax machine. If you do not know which method your line uses, contact

your telephone company.

It is necessary to send tone dial signals to make use of certain services. If

your telephone system works on pulse dialling, you can still send tone

signals by pressing * or #. All numbers are then transmitted

in the tone dialling method. As soon as you replace the handset

on the fax machine, your fax machine will switch back to pulse

dialling.

! If you cannot establish the desired telephone or fax

connection to the called party, select a different

dialling mode.

Select function 15 by pressing FUNCTION and then entering

the digits 15. Press OK.

2 Choose pulse or tone dialling by pressing </>. Press OK.

DIAL MODE: PULSE

DIAL MODE: TONE

3 Press </> in order to switch to operation on a PABX extension.

Press OK.

PABX: NO

PABX: yes

Now enter the key that has to be pressed to obtain an outside line

(outside line access code). This is either R or a number key. Press

OK.

Press OK. Your machine will then check that the outside line can

be obtained.

6 ... if the check is successful, briefly appears:

CHECK OK

... if the check is unsuccessful, briefly appears:

CHECK NOT OK

You will be asked to repeat the entry. Change either the dial mode

or check the key for obtaining an outside line. However, if you have

chosen the correct dial mode as well as the correct key and on the

display still appears the message

CHECK NOT OK

delete the key for obtaining the outside line by pressing <.

In case your PABX requires R to obtain an outside line but it is

still not possible to get through to the line, your system might not

be according to the regulations. Therefore some technical settings

have to be changed on your fax machine. Please refer to

your “Fax Call Centre”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips Magic Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips Magic

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info