Bedienungsanleitung Philips MCD2160 (Seite 23 von 28) (Englisch)

578088

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

21EN

11 Troubleshooting

Warning

•

Never remove the casing of this device.

To keep the warranty valid, never try to repair

the system yourself.

If you encounter problems when using this

device, check the following points before

requestingservice.Iftheproblemremains

unsolved, go to the Philips Web page (www.

philips.com/support). When you contact Philips,

make sure that the device is nearby and the

model number and serial number are available.

No power

• Make sure that the AC power cord of the

device is connected properly.

• Make sure that there is power at the AC

outlet.

• As a power-saving feature, the system

switches off automatically 15 minutes after

track play reaches the end and no control

is operated.

No sound or poor sound

• Adjust the volume.

• Check that the speakers are connected

correctly.

• Check if the stripped speaker wires are

clamped.

Remote control does not work

• Beforeyoupressanyfunctionbutton,rst

select the correct source with the remote

control instead of the main unit.

• Reduce the distance between the remote

control and the unit.

• Insert the battery with its polarities (+/–

signs) aligned as indicated.

• Replace the battery.

• Aim the remote control directly at the

sensor on the front of the unit.

No disc detected

• Insert a disc.

• Check if the disc is inserted upside down.

• Wait until the moisture condensation at

the lens has cleared.

• Replace or clean the disc.

• UseanalizedCDorcorrectformatdisc.

Disc does not play

• Insert a readable disc with the label side

facing you.

• Check the disc type, color system and

regional code. Check for any scratches or

smudges on the disc.

• Press

to exit the system setup menu.

• Disable the password for parental control

or change the rating level.

• Moisture has condensed inside the system.

Remove the disc and leave the system

turned on for about an hour. Disconnect

and reconnect the AC power plug, and

then turn on the system again.

No picture

• Check the video connection.

• Turn on the TV to the correct Video-In

channel.

• Progressive scan is activated but the TV

does not support progressive scan.

Black and white or distorted picture

• The disc does not match the TV color

system standard (PAL/NTSC).

• Sometimes a slight picture distortion may

appear. This is not a malfunction.

• Clean the disc.

• A distorted picture may appear during

progressive scan setup.

The aspect ratio of the TV screen cannot be

changed even though you have set the TV

display format.

• Theaspectratioisxedontheloaded

DVD disc.

• The aspect ratio may not be changed for

some TV systems.

DivX video les cannot be played.

• EnsurethattheDivXvideoleis

complete.

• Ensurethattheleextensioniscorrect.

• Due to Digital Rights issue, the DRM-

protectedvideolescannotbeplayed

through an analog video connection (e.g.

composite, component and scart). Transfer

the video content onto the Disc Media

andplaytheseles.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips MCD2160 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips MCD2160

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info