Bedienungsanleitung Philips MCD288 (Seite 25 von 44) (Englisch)

64280

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

English

Basic Functions

Switching the system on/off

● Press ECO POWER/STANDBY-ON B

(STANDBY B on the remote).

➜ “HELLO” is displayed briefly. The system will

switch to the last selected source.

● Press DISC, TUNER or AUX on the remote.

➜ The system will switch to the selected source.

To switch the system to standby mode

● Press ECO POWER/STANDBY-ON B

(STANDBY B on the remote).

➜ The interactive sound settings, last selected

source and tuner presets will be retained in the

player’s memory.

Switching the system to Eco

Power Standby mode

● Press ECO POWER/STANDBY-ON B in

the active mode.

➜ The system enters Eco power standby (the

ECO POWER LED is on) or normal standby

with clock display.

● The volume level (up to a maximum volume

level of 12), interactive sound settings, last

selected mode, source and tuner presets will be

retained in the player's memory.

● If the system is normal standby with clock display,

press and hold ECO POWER/STANDBY-

ON Bfor 3 seconds or more to switch to Eco

power standby or vice versa.

Power-saving automatic standby

As a power-saving feature, the system will

automatically switch to Standby mode if you do

not press any buttons within 15 minutes after a

disc has stopped playing.

Sound Control

DBB, DSC and LOUDNESS sound features

cannot be activated at the same time.

DBB (Dynamic Bass Boost)

DBB enhances the bass response.

● Press DBB on the remote to enable/disable

DBB feature.

➜ Some discs might be recorded in high

modulation, which causes a distortion at high

volume. If this occurs, switch off DBB or reduce

the volume.

DSC (Digital Sound Control)

DSC provides a different type of preset sound

equalizer setting.

● Press DSC on the remote repeatedly to select:

CLASSIC, JAZZ, ROCK, POP or FLAT (for DVD:

NORMAL, CONCERT, DRAMA, ACTION or

SCI-FI).

LOUDNESS

LOUDNESS feature enables the system to

automatically increase the treble and bass sound

effect at low volume (the higher the volume, the

lower the treble and bass increase).

● Press LOUDNESS on the remote to enable or

disable LOUDNESS feature.

➜ icon appears/disappears after this feature

is enabled/disabled.

➜ LOUD ON or LOUD OFF is displayed.

Volume control

Press VOLUME -/+ (VOL +/- on the remote)

to increase or decrease the volume level.

➜ ”VOLUM XX” is displayed on the display

panel. “XX” denotes the volume level.

To listen through the headphone

● Connect the headphone plug to the n socket

on the front panel of the DVD player.

➜ The speakers will be muted.

To switch off the volume temporarily

● Press MUTE on the remote.

➜ Playback will continue without sound and

“MUTING” flashes.

● To activate sound reproduction, you can:

– press MUTE again;

– adjust the volume controls;

– change source.

Dimming the display screen

● Press DIM repeatedly to select different levels of

brightness for the display screen.

pg025-pg044_MCD288-22-Eng-B 2006.3.10, 17:1525

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips MCD288 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips MCD288

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info