Bedienungsanleitung Philips MCD370 (Seite 13 von 25) (Englisch)

67103

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

English

Picture Setup

SCART

TV SHAPE

Select the aspect ratio of the TV to be connected. If your

DVD is not encoded to allow you to change the aspect

ratio, TV shape cannot be changed.

4:3 PS (panscan)

Select this if you have a

conventional TV set and your

DVD is not formatted for

widescreen viewing, use this

setting. A wide picture is

displayed on the whole TV screen with a portion

automatically cut off.

4:3 LB (letterbox)

Select this if you have a

conventional TV set and your DVD

is formatted for widescreen

viewing, use this setting. Wide

bands is displayed on the upper

and lower portions of the TV screen.

16:9 (widescreen)

Select this if you have a

widescreen TV set, use this

setting (you must also set

your widescreen TV to “full

size”).

TV SYSTEM

Allows you to select the colour system that corresponds to

your TV.

AUTO

Select this if the connected TV is multi system, select this

mode. The output format will be in accordance with the

video signal of the disc.

NTSC

Select this if the connected TV is NTSC system, select

this mode. It will change the video signal of a PAL disc

and output to NTSC format.

PAL

Select this if the connected TV is PAL system, select this

mode. It will change the video signal of an NTSC disc

and output to PAL format.

VIDEO OUT

Set the Video Output according to your video connection.

This setting is not required if you are using the VIDEO OUT

jack (yellow) to connect the DVD micro system to your TV.

SCART

Select this if you have connected the DVD micro system

to your TV using the Scart jack.

S-VIDEO

Select this if you have connected the DVD micro system

to your TV using S-Video jack.

SCR SAVER (Screen Saver)

OFF

Select this to disable the screen saver function.

Select this if you wish to dim the TV screen when the

disc playback is stopped or paused for more than one

minute. This will prevent your display device from

becoming damaged.

Sound Setup

DIGITAL OUTPUT

Allows you to specify the type of digital output suitable for

the optional audio equipment that connected through the

DIGITAL OUT at the rear of your DVD micro system.

ALL

Select this if you have connected the digital output to a

multichannel decoder receiver.

PCM 96K

Select this if the optional audio equipment is capable of

processing digital signal input with sampling rates of 96 kHz.

PCM 48K

Select this if the optional audio equipment is incapable of

processing 96 kHz digital signal input. The signal will then

be converted to a standard signal with sampling rates of

48 kHz.

OFF

Select this to deactivate the digital output.

NIGHT MODE

Night function can also be accessed via the remote control.

OFF

Select this when you want to enjoy the surround sound

with its full dynamic range.

Select this to level out the volume. High volume outputs

will be softened and low volume outputs are brought

upward to an audible level. This feature is only available

for movies with Dolby Digital mode.

PREPARATIONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips MCD370 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips MCD370

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info